SKU: VCH418-M-5M

Lámina de vinilo «Satin Flame Orange» (VCH418-M)

(1)
$ 4,548.00
Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Descripción

«Orange Flame» no es un naranja brillante. Es cobre fundido. La base es profunda y cálida, un rojo anaranjado con un fondo de bronce y un matiz perlado dorado que resalta en las luces, por lo que toda la superficie parece menos pintura y más metal enfriándose. El acabado satinado elimina el brillo y deja que la profundidad destaque, que es precisamente lo que lo diferencia de los llamativos naranjas «candy». Esta es la versión exótica y propia de los hipercoches del naranja, no la de los coches tuneados.

Su carácter se asemeja casi exactamente al del Lamborghini Arancio Argos satinado, con la calidez dorada de un Porsche Lava Orange satinado y la profundidad fundida de un Lexus Cadmium Orange. En un modelo estadounidense, se acerca al Chevrolet Amplify Orange satinado, pero es más metálico y de mayor calidad. Junto al GAL06-HD Paprika, la diferencia es obvia: el Paprika es el naranja chicle puro, mientras que el Orange Flame es el cobre de lava con partículas de bronce y oro.

Cobra vida a lo largo del día. En interiores se percibe como un bronce cobrizo; la luz del día lo transforma en un mandarina quemado metalizado; y al atardecer se convierte en lava ardiente. Es ideal para coches diseñados para llamar la atención: un Lamborghini Huracán y un Urus, un McLaren 720S, un Porsche 911 Turbo, un Audi R8, un Chevrolet Corvette C8, un BMW M4, un Ford Mustang y un Raptor, un Toyota GR Supra o un Lexus RC F.

Características principales:

  • Naranja metalizado satinado, base de cobre fundido con sombras rojo-naranja y reflejos dorados perla
  • Vinilo polimérico calandrado de alta calidad con recubrimiento plateado y canales de escape de aire
  • Adhesivo acrílico a base de disolvente de Henkel, transparente, ultrarresistente a la intemperie y removible
  • El papel protector de alta calidad mantiene la lámina plana para un acabado más liso con menos efecto «piel de naranja» durante la instalación
  • Se adapta a curvas moderadas, espejos y contornos de paneles
  • Adhesivo removible y seguro, que protege la pintura original de fábrica que hay debajo

Features

Film Construction

  • Film Type: Polymeric hybrid film with silver coating and air-release channels
  • Series: 180 series
  • Film Thickness: 0.15 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.28 mm
  • Liner: Felix Schoeller 20-104-20-1,9, double-sided PE-coated Kraft, one side solventless silicone-coated, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin, directional
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service range: -35°C to +35°C
  • 180° peel strength: 10.66 N/25mm (standard ≥6.8)
  • Initial tack: 822 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70, no shifting (standard ≥60)
  • Aging tested +65°C and -65°C: no adhesive residue
  • Storage: 2 years at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
  • Metalized films require careful handling. The appearance of the metalized layer can change with crumpling, overstretching, or excessive heat. The film may scratch during application or daily use. The warranty does not cover the scratching of the film.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces, avoid overstretching
  • Directional film, check orientation before cutting
  • Overlap: 3–4 mm
  • Post-heat: 95°C
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • Handle the satin chrome surface carefully; it can scratch during installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Consejos valiosos

Ver todos
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Envolver un coche oxidado: ¿es posible?

    Envoltura de coche ha explotado en popularidad, ofreciendo una forma dinámica de personalizar los vehículos. Pero, ¿qué sucede cuando el lienzo no es prístino? ¿Puede envolver con éxito un automóvil...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Cómo envolver un auto en invierno

    Envolver un automóvil en vinilo durante el invierno puede ser un desafío debido a las temperaturas frías, pero con la preparación y las herramientas correctas, aún puede lograr un acabado...

    Vasile Sayfutdin |