Set maestro todo en uno TeckWrap para instalación de vinilo para vehículos
Precio regular $ 3,004.00Precio unitario- Precio regular $ 227.00Precio unitario
Imanes para vinilo para vehículos TeckWrap (4-8 artículos)
Precio regularDe $ 378.00Precio unitarioTeckWrap Tintado de ventanas / PPF Racleta de goma
Precio regular $ 244.00Precio unitario- Precio regular $ 661.00Precio unitario
Herramienta tipo bolígrafo TeckWrap para liberar aire en vinilo para vehículos
Precio regularDe $ 95.00Precio unitarioTeckWrap Racleta de goma para tintado de ventanas (mango largo)
Precio regular $ 282.00Precio unitario- Precio regularDe $ 187.00Precio unitario
- Precio regularDe $ 139.00Precio unitario
Cuchillas para navaja multiusos SK5 TeckWrap
Precio regularDe $ 378.00Precio unitario- Precio regularDe $ 188.00Precio unitario
Cinta métrica flexible TeckWrap
Precio regular $ 246.00Precio unitarioRacleta flexible triangular para contornos TeckWrap
Precio regular $ 87.00Precio unitarioPulverizador a presión para PPF TeckWrap
Precio regular $ 340.00Precio unitarioRaspador triangular TeckWrap para tintado
Precio regularDe $ 95.00Precio unitario
Most bad installs are not caused by bad hands. A dry felt drags scratches across a gloss panel, a dull blade tears the film instead of cutting it, a heat gun that spikes cooks the finish, and a magnet slips just when the film needs holding. TeckWrap tools come from the same team that makes the film, so every squeegee, blade and heat gun is built around how vinyl, PPF and window tint actually behave on a car. Start with a complete master set or add the one tool your kit is missing, and spend less time fixing and more time finishing.
Master Sets by Film Type
Vinyl, PPF and tint each go on differently, so each needs a different squeegee and a different routine. A master set puts the right tools for one film type in a single order.
| Set | How the film goes on | Tools that matter most | Shop |
|---|---|---|---|
Vinyl Wrap Master SetColor change film | Dry, with heat to stretch and post-heat | Felt-edged squeegees, fresh buffers, tucking tools, magnets, a safety cutter and a heat gun | Vinyl Master Set |
PPF Master SetPaint protection film | Wet, with slip and tack solution | Firm PPF squeegees, a rubber squeegee, a pressure sprayer and installation liquid | PPF Master Set |
Window Tint Master SetWindow film | Wet, on the inside of the glass, with heat shrinking on curved glass | Rubber tint squeegees, triangle scrapers for tight edges and a heat gun for shrinking | Tint Master Set |
Tools by Category
Building your own kit, or replacing a worn tool? Every tool in the collection fits one of these jobs.
| Category | What it does | Shop |
|---|---|---|
Squeegees and Scrapers | Lay the film down and push out air or solution. Softer edges suit vinyl, firmer polyurethane and rubber suit PPF and tint. Fresh buffers keep the face of the film free of scratches. | Multi-Color Squeegee Set PPF Squeegee Set Tint / PPF Rubber Squeegee Triangle Tint Scraper Buffers (10 pieces) |
Knives and Blades | Trim edges, cut relief cuts and split liner. Safety cutters keep the blade covered, and snap-off SK5 blades give a sharp edge for every panel. | Safety Cutter Utility Knife (9mm) Utility Knife (18mm) SK5 Blades Round Corner Blades |
Heat Guns | Soften film to stretch it, shrink tint on curved glass, post-heat edges and lift old film for removal. | High-Performance Heat Gun Standard Heat Gun |
Edges and Details | Tuck film into panel gaps, behind seals and around trim, and release trapped air without lifting the film. | Tucking Tool Set Air-Release Pen Contour Soft Squeegee |
Positioning and Prep | Hold film in place, measure panels, keep fingerprints off the adhesive and wet the surface for PPF and tint. | Wrap Magnets Soft Measuring Tape Premium Gloves PPF Pressure Sprayer PPF Installation Liquid |
Storage | Keep squeegees, knives and blades on your belt during the job and protected between jobs. | Tool Pouch Toolbox |
High-Performance vs Standard Heat Gun
Both guns reach 650 °C. The difference is how precisely, and how low, you can set the heat.
| Feature | High-Performance Heat Gun | Standard Heat Gun |
|---|---|---|
| Temperature | 50-650 °C with a digital display | 100-650 °C with step-less control |
| Airflow and power | 2000 W, 6 airflow speeds | Dual heating coils for faster heat-up |
| Extras | Remembers your last setting, copper motor, heat-resistant nozzle sleeve | Overload protection, built-in heat shield |
| Plugs | US, EU, UK, CN and AU | US, EU, UK, CN and AU |
| Best for | Daily shop use, and the low settings PPF and tint shrinking need | DIY projects and a second gun in the shop |
Looking After Your Tools
- Swap a buffer as soon as it picks up grit or wears thin. A worn buffer scratches the film you are trying to protect.
- Snap the blade to a fresh edge often. A dull blade drags, tears film and needs more pressure, which is how paint gets cut.
- Wipe squeegee edges clean after each job and check them for nicks before the next one.
- Let a heat gun cool with the airflow running before you put it away, and store it dry.
Vinyl Wrap Tools FAQ
Can I use the same squeegee for vinyl, PPF and tint?
Not ideally. Vinyl goes on dry, so a felt or buffered edge protects its face. PPF and tint go on wet and need a firmer polyurethane or rubber edge to push the solution out from under the film. Using the wrong one leaves either scratches or trapped water.
What temperature should I set my heat gun to?
Follow the post-heat temperature in your film's technical data sheet, because it changes from film to film. Start low, keep the gun moving and hold it a few inches from the surface. Too much heat burnishes matte and satin films and damages chrome.
Which knife should I use on a car?
For trimming film and splitting liner, a safety cutter keeps the blade covered. For detailed trimming, a 9mm knife with a sharp 30° blade gives the most control. Keep cutting pressure light and never cut directly against paint.
Is a master set worth it over buying tools one by one?
If you are starting out or adding a new film type to your shop, yes. Each set covers the core tools for one kind of install in a single order. If you already have a working kit, buy the single tools you need to replace.








