It is common to use inlays and overlays for vinyl film wrapping. When a section is too tricky to handle, and you know that the material might not be able to hold there for the...
Car wrap tips
Gloss carbon vinyl wrap film is nothing new, and some people will wrap their entire hood in carbon to create a unique customized look. There is something you should concern about if you want to...
When wrapping an old vehicle with vinyl wrap film, you may come across old rubber moldings, which are flaking off and have lots of dirt behind them. It can take a lot of time...
Some installers are used to removing hardware when wrapping a section with vinyl wrap film. For example, they will take off the roof rack so they can wrap the roof in one piece for full...
For certain sections of a vehicle, it might be good to remove the hardware if you want to achieve full coverage when wrapping with vinyl film. There might be quite a few screws, which can...
Taking off an emblem can be a great help when wrapping a vehicle with vinyl wrap film. However, emblems are primarily plastic and fragile. If you do not handle it correctly, you may break it...
For certain types of vehicles, manufacturers have made a rubber between the front bumper and the hood. This creates a challenge for installers when doing vinyl wrapping, as it is easy to cut the rubber...
From time to time, installers have to replace their buffer on the squeegee to ensure a perfect result for the next vinyl wrap project. Because buffers vary, sometimes they are easy to remove, and other...