Lámina protectora transparente BLKM en color negro ónix

Film construction

• Film: Aliphatic TPU, Lubrizol ESTANE® base, matte black color
• Total thickness: 315 ± 10 µm
• Application layer: 185 ± 10 µm
• Peel adhesion: ~1500 g/inch
• Light transmission: 0% (fully opaque)
• Roll size: 1.52 m × 15 m

Performance

• Tensile strength: ≥16 MPa
• Product elongation at break: >300%
• Coating elongation at break: 100%
• UV resistance: ≥90%
• Maximum temperature: 100°C
• Weathering tested equivalent to 9 years (ESTANE® TPU base)

Warranty

5-year limited warranty. Scratches beyond self-healing range and impact damage not covered.

• Apply at +17°C to +23°C
• Wet application with slip and tack solutions
• Tools: squeegee with soft buffer, heat gun, knife, microfiber
• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
• Adhesive cures fully at room temperature within 1 week
• Cure: 24–48 hours before water exposure
• Matte finish requires matte-safe cleaners only
• Avoid waxing or pressure-washing for the first 7 days
• Surface must be thoroughly cleaned and decontaminated before install

TeckWrap products are warranted to be free of material defects for the warranty period. In case of defects, TeckWrap will replace or compensate at its sole discretion. Warranty does not cover normal wear, labor, transportation, improper installation, physical impact damage, or scratches beyond the self-healing range.

Use same production LOT for consistency across panels.