Lámina protectora transparente W75 Auro+Paint

Film construction

• Film: Aliphatic TPU, Lubrizol ESTANE® base, gloss finish
• Top coat: Lotus Effect, solvent-resistant, stain-resistant, scratch-resistant, self-healing (TORAY)
• Total thickness: 301 ± 10 µm
• Application layer: 181 ± 5 µm
• Peel adhesion: ~2300 g/inch (strongest bond in TeckWrap clear PPF range)
• Light transmission: ~86% (clear gloss optical class)
• Roll size: 1.83 m × 15 m (wide format)

Performance

• Tensile strength: ~22 MPa
• Product elongation at break: ~300%
• Coating elongation at break: ~102%
• UV resistance: ~95%
• Maximum temperature: 100°C
• Self-healing surface (minor scratches recover with heat)
• Weathering tested equivalent to 9 years (ESTANE® TPU base)

Warranty

5-year warranty from production date. Scratches beyond self-healing range and impact damage not covered.

• Apply at +17°C to +23°C
• Wet application with slip and tack solutions
• Tools: squeegee with soft buffer, heat gun, knife, microfiber
• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
• Wide format covers large panels in a single sheet, plan layout to minimize cuts and waste
• Adhesive cures fully at room temperature within 1 week
• Cure: 24–48 hours before water exposure
• Avoid waxing or pressure-washing for the first 7 days
• Surface must be thoroughly cleaned and decontaminated before install

TeckWrap products are warranted to be free of material defects for the warranty period. In case of defects, TeckWrap will replace or compensate at its sole discretion. Warranty does not cover normal wear, labor, transportation, improper installation, physical impact damage, or scratches beyond the self-healing range.

Use same production LOT for consistency across panels.