Lámina protectora transparente mate M75

Film construction

• Film: Aliphatic TPU matte clear paint protection film, Lubrizol ESTANE® base
• Top coat: Lotus Effect, solvent-resistant, stain-resistant, scratch-resistant, self-healing (TORAY)
• Total thickness: 270 ± 10 µm
• Application layer: 180 ± 10 µm
• Peel adhesion: ~1800 g/inch
• Light transmission: ~59% (matte translucent)
• Roll size: 1.52 m × 15 m

Performance

• Tensile strength: ≥15 MPa
• Product elongation at break: 280%
• Coating elongation at break: 110%
• UV resistance: 98%
• Maximum temperature: 100°C
• Self-healing surface (minor scratches recover with heat)
• Weathering tested equivalent to 9 years (ESTANE® TPU base)

Warranty

5-year warranty from production date. Scratches beyond self-healing range and impact damage not covered.

• Apply at +17°C to +23°C
• Wet application with slip and tack solutions
• Tools: squeegee with soft buffer, heat gun, knife, microfiber
• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
• Adhesive cures fully at room temperature within 1 week
• Cure: 24–48 hours before water exposure
• Matte finish requires matte-safe cleaners only, no waxes or gloss-enhancing products
• Avoid pressure-washing for the first 7 days
• Surface must be thoroughly cleaned and decontaminated before install

TeckWrap products are warranted to be free of material defects for the warranty period. In case of defects, TeckWrap will replace or compensate at its sole discretion. Warranty does not cover normal wear, labor, transportation, improper installation, physical impact damage, or scratches beyond the self-healing range.

Use same production LOT for consistency across panels.