SKU: CG02-HD-5M

Lámina de vinilo blanco de alto brillo (CG02-HD)

(2)
€202,95
Los gastos de envío se calcularán al momento de pagar.

Descripción

Los revestimientos blancos suelen parecer más brillantes en una muestra que en un vehículo. El «High Gloss White» de TeckWrap mantiene un aspecto neutro, brillante y similar al de la pintura, en lugar de adquirir tonos azulados, amarillentos o cremosos bajo la luz. 

Características principales

  • Tono blanco neutro: blanco puro sin efecto perlado ni brillo metálico, que se mantiene fiel bajo diferentes condiciones de luz.
  • Brillo similar al de la pintura: la lámina híbrida polimérica multicapa recrea el aspecto de una pintura OEM recién pulida. 
  • Colocación sin burbujas: los microcanales de aire liberan el aire atrapado al presionar la lámina, lo que permite que las secciones grandes queden lisas. 
  • Lámina fácil de instalar: se adapta a los retrovisores, los bordes y las zonas moderadamente empotradas con calor. 
  • Adhesión segura para la pintura: adhesivo acrílico transparente de Henkel a base de disolvente, resistente a la intemperie y que se despega sin dejar residuos. 

El TeckWrap High Gloss White no presenta reflejos nacarados, ni brillo metálico, ni cambios de color. Es un blanco puro de fábrica que se mantiene neutro bajo la luz cambiante, en lugar de tornarse azul, amarillo o gris. El brillo recrea el aspecto de una pintura original recién pulida, no el de una lámina blanca brillante colocada sobre la carrocería. Si lo comparas con un blanco genérico del mercado de recambios, la diferencia es inmediata. 

Coincidencia con el color OEM

  • El más parecido al «Alpine White» de BMW.
  • Misma neutralidad que el «Grand Prix White» de Porsche.
  • Mismo brillo que el «Pure White» de Tesla.
  • La misma saturación que el «Championship White» de Honda. 

Los mejores blancos OEM rara vez recurren a efectos perlados o metalizados. El blanco de alto brillo de TeckWrap aporta ese mismo blanco nítido a tu Supra, Mustang, Corvette o AMG. 

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Consejos valiosos

Ver todos
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Envolver un coche oxidado: ¿es posible?

    Envoltura de coche ha explotado en popularidad, ofreciendo una forma dinámica de personalizar los vehículos. Pero, ¿qué sucede cuando el lienzo no es prístino? ¿Puede envolver con éxito un automóvil...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Cómo envolver un auto en invierno

    Envolver un automóvil en vinilo durante el invierno puede ser un desafío debido a las temperaturas frías, pero con la preparación y las herramientas correctas, aún puede lograr un acabado...

    Vasile Sayfutdin |