SKU: CPX411-3M

Gloss Nordic Green Color PPF (CPX411)

$249.00
Shipping calculated at checkout.

Shipping & duties - United States

Full rolls. Free shipping, duties paid. The price you see at checkout is the price you pay - nothing collected on delivery.

Cut lengths. Shipping calculated at checkout, including air freight and duties.

Most installers order full rolls; once freight is factored in, the per-foot cost is lower.

Description

Most factory greens lean warm, close to olive or forest. TeckWrap’s Nordic Green pairs a deep, cool green with fine metallic light, presenting a color that is closer to a fjord at dusk. 

Key Attributes

  • Cold-water green: deep fjord tone with a quiet metallic sparkle that never tips toward bright or synthetic.
  • Gravel doesn't stand a chance: the aliphatic TPU layer takes on stone chips and road debris, protecting the factory clear coat.
  • Heat brings back the surface: self-healing top coat helps minor scratches and swirl marks vanish under heat or sunlight, giving a clean look. 
  • Water beads and rolls off: the surface repels moisture and road chemicals so nothing sits long enough to stain.
  • Air gets a clear exit: built-in air-release channels help trapped air escape during dry installation for a cleaner first pass.  
  • Curves are not a problem: 360 to 430% elongation lets the film settle into curves, mirrors, and recessed panels without wrinkling or peeling off. 

Nordic Green takes its cue from a fjord after the daylight starts to fade. The deep green stays cool rather than drifting toward yellow or olive, while fine metallic sparkle gives the gloss surface a quiet flicker. In shade, the color settles into a darker forest-green character. Direct light brings the metallic detail forward, adding depth without making the green bright or loud. 

OEM Match

  • Closest to Land Rover Aintree Green.
  • Same saturation as Porsche Oak Green Metallic.
  • Deeper than Audi District Green.

Take the deep green direction seen on Land Rover and Porsche and put it across your own build, with the factory paint protected underneath.

For installers

  • Aliphatic TPU base for impact resistance and long-term dimensional stability
  • Fluorocarbon polyurethane top coat with integrated hydrophobicity and chemical resistance
  • 344 µm total film thickness, 194 µm application layer, true PPF-class stone-chip defense
  • 22 MPa tensile strength, 1350 g/inch peel adhesion, secure hold with no lifting or tear under impact
  • 360 to 430% elongation, conforms to complex curves, mirrors, and recessed panels
  • Low-tack acrylic PSA with full repositioning capability during install
  • Ultra micro-grooved PET liner with air-release channels, dry-install system
  • Faster install than wet-application PPF, with cleaner first-pass results
  • 5-year manufacturer warranty, fully traceable for installer warranty claims

Features

Film construction

  • Film type: Premium aliphatic TPU color paint protection film
  • Top coat: Fluorocarbon polyurethane (hydrophobic, anti-yellowing, chemical resistant)
  • Total thickness: 327 ± 10 µm
  • Application layer thickness: 177 ± 10 µm
  • Adhesive: Low-tack acrylic PSA, repositionable during install
  • Adhesive peel/tack: 1350 g/inch
  • Liner: Ultra-micro-grooved PET with air-release channels
  • Finish: Gloss color PPF, Deep Amethyst violet, opaque
  • Light transmission: 0%
  • Roll size: 5ft x 59ft (1.52 x 18m)

Performance

  • Tensile strength: 22 MPa
  • Product elongation at break: 360–430%
  • Self-healing surface (minor scratches recover with heat)
  • UV-induced color stability
  • Resistant to stone chips, road grime, light abrasions, and chemical contamination
  • Dimensionally stable across temperature variations

Warranty

5-year TeckWrap warranty against yellowing, cracking, peeling, delamination, and material defects. Improper installation, physical impact damage, and scratches beyond the self-healing range are not covered.

Application
  • Apply at +17°C to +23°C
  • Service range: -40°C to +50°C
  • Dry-install system, no wet solution required (air-release channels handle film placement)
  • Tools: squeegee with soft buffer, heat gun, knife, microfiber cloth
  • Repositionable during installation due to to low-tack PSA
  • Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
  • Post-heat: activate adhesive after final positioning
  • Cure: 24–48 hours for full adhesion
  • Use same production batch for full vehicle, label and store leftovers by batch code
  • Avoid waxing or pressure-washing for the first 7 days
  • Surface must be thoroughly cleaned and decontaminated before installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, physical impact damage, or scratches beyond the self-healing range.

As with all premium color PPF, slight variations in hue or gloss may occur between production batches. Use the same batch for a complete vehicle and order enough material from one batch for the full job. Screen images may vary, refer to physical samples. Use same production LOT for consistency across panels.

How TeckWrap compares

Not all film is the same

Cheap film won't last a season. Legacy brands charge a brand premium. TeckWrap sits in the middle: professional-grade film at an honest price.

The cheap way

Budget Film

Saves money up front, then bubbles, fades and cracks within a season.

Cost to get the look

✕Cheapest sticker price. You are buying color, not protection.

What one roll covers

✕Short cuts only. A full car means joining two rolls.

Dry install, clean finish

✕Dry install in name only. Adhesive lines stay in the finish.

What comes in the box

✕A bare roll in a bag. Bring your own everything.

Warranty you can claim

✕Eight years on paper, from a factory you cannot trace.

Color range

✕A long catalog online. Made to order, and the batch drifts.

The smart way

TeckWrap Film

Professional-grade film at an honest price. Reversible, paint-safe, and color-shifting.

Cost to get the look

From $239. One film does the color change and the chip protection.

What one roll covers

59 ft roll (18 m), 5 ft wide. A full car from one roll.

Dry install, clean finish

Dry install with minimal adhesive lines, and heat clears most of them.

What comes in the box

Premium pack with install tools, care guidance and warranty paperwork.

Warranty you can claim

5-year manufacturer warranty, fully traceable for installers.

Color range

37 live colors, held in stock, traceable to the batch. New shades land every quarter.

Order a Sample

See the finish in person before you commit.

The legacy way

Legacy Brand Film

Comparable film, but you pay a brand premium.

Cost to get the look

✕Protection line first, color added later, at a premium price.

What one roll covers

✕Standard roll is 49 ft (15 m). Long panels need a second roll.

Dry install, clean finish

–Dry or wet depending on the line, at a higher material cost.

What comes in the box

✕A roll and a warranty card. Tooling is the shop's problem.

Warranty you can claim

–Ten year headline term. Read the exclusion list before you trust it.

Color range

✕A tight core palette, through a distributor, at a premium price.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |