Paint Protection Film

PPF270-30


TeckWrap Clear TPU Paint Protection film is advanced film designed to achieve long term protection of vehicle surface.

Technical specification for PPF290

Protective film (μm) - 55
TPU film (μm)  - 185
Release film (μm) -  90
Glue adhesion (gf/inch)  - 525
Elongation % - 218
Breaking strength(kgf/inch) - 7.6
Chromaticity blackness (5pt) - 3.5
Flatness / Orange peel (5pt) - 3
Gloss (%,@60°) - 92.5
Anti-oil pen stain (Deli Marker pen, 5pt) -  5
Solvent resistance (Marker pen, 5pt)  -  3.5
Solvent resistant corrosion (DMF)  -  30
Resistance to scratching (5pt) - 4
Normal temperature scratch repair degree (1hr, 5pt)  -  4.5
Normal temperature scratch repair degree (24hr, 5pt)  -  4.5 (90%)
 Heating scratches completely repair ability (70℃, 5pt)  - 4.5

The adhesive has a viscous force of 222 gf/inch (at temperature of 24 ° C, and a humidity of 54%)

Physical properties

Size: 1.52m x 15m (59.8" x 590.6", 4.98ft x 49.2ft, 1.66yd x 16.4yd)

Storage temperature: +14C - +20C with 50% relative humidity

Shelf-life: 1 year from production date (save LOT number)

Application: on a wet surface

Warranty: 5 years from production date. The product is warranted to be free of defects in the material. In case of product defects communicated in the mentioned period, TeckWrap will consider and determine the existence of the defect and further decide at its sole discretion to either replace the defective product without charge or compensate it with money in such amount, as TeckWrap deems reasonable.

Top coating features: solvent and stain resistance, resistance to heavy metals, resistance to scratches, self-healing

 

Click the link for Installation guide

 

The technical specification for PPF290C

*Self-Healing                    ★★★★

*Anti-Yellowing                ★★★★

*Durability                        ★★★★★

 

Test Method                   Units          Typical Properties

● Topcoat Thickness

10 μm±1

● TPU Thickness

135 μm±3

● Taber abrasion

ASTM D-1044                    1000g weight                <3.5g

● Gloss value

OTM-3-309                                                               >80

● Surface Haze

ASTM D-1003                     %                                    <1

● Tensile Strength

D-412                                  psi                                   5000

                                          mpa                                  4.47

● Elongation at Break

D-412                                 %                                      550

● 5% Acid

5% NaOH

100% Alcohol

Gasoline

Boiling water resistance

24h check 

No change

● Heating resistance

80℃ 2h -20℃ 2h          10 cycle test                 No change

● Outdoor Weathering

TEST 1                              3000hours                  No change

TEST 2                              1000h0urs                  No change

TEST 1. QUV  using UVA bulb, 4 hours 50℃ UV exposure, 4 hours 60℃ condensation

TEST 2. 6500W Xenon Arc, Irradiance: 0.51 W/m2(340 nm), 65℃. Humidity 50% R.H.

Adhesive: high-performance acrylic, non-yellowing

Adhesive thickness:   35μm±2

Peel on glass at 180(kg/25mm):

20 minutes after application  1.2 kg/25mm

24 hours after application 1.5 kg/25mm