SKU: GAL30-HD-5M

Lapisan Vinyl Merah Velvet Ultra Gloss (GAL30-HD)

(13)
Rp 4.185.000,00
Pengiriman dihitung saat checkout.

Keterangan

Lapisan berwarna merah biasanya mengalami masalah dengan sorotan yang bernuansa oranye atau bayangan yang kusam, tergantung pada sudut pandang. TeckWrap Ultra Gloss Velvet Red tidak demikian. Produk ini menghadirkan kedalaman warna merah tua yang kaya dengan sentuhan metalik hangat yang tetap jenuh dalam setiap perubahan pencahayaan. 

Atribut Utama

  • Kedalaman warna merah permen yang kaya: nada merah tua yang pekat dan kilau metalik merah anggur membuat hasil akhirnya tetap hidup dari matahari terbit hingga terbenam. 
  • Permukaan mengkilap yang halus: menampilkan warna merah permen dengan sentuhan rubi pada sorotan dan mempertahankan kehangatan ceri hitam pada bayangan. 
  • Perekat yang ramah cat: Perekat transparan poliakrilat Henkel menghasilkan ikatan yang tahan cuaca. Perekat ini dapat dilepas dengan bersih tanpa meninggalkan bekas lem.  
  • Bahan yang responsif terhadap panas: melunak saat terkena panas sehingga dapat meluncur dengan mulus di atas lekukan, bumper, kaca spion, dan garis kontur yang dalam. 
  • Tahan cuaca ekstrem: mempertahankan warna dan kilapnya meskipun terpapar sinar matahari, hujan, dan penggunaan sehari-hari. 

TeckWrap Velvet Red berubah dari warna ceri hitam yang misterius di tempat teduh menjadi rubi yang cerah dan berkilau di bawah sinar matahari langsung. Dalam cahaya yang lebih lembut, warnanya berubah menjadi nada merah anggur yang lebih dalam dengan karakter yang halus dan berkilau. Warna ini mempertahankan kedalamannya dan tidak menjadi datar atau kusam. 

Sesuai dengan Warna OEM

  • Paling mirip dengan BMW Individual Aventurin Red Metallic
  • Memiliki kedalaman yang sama dengan Mazda Soul Red Crystal 
  • Lebih hangat daripada Cadillac Red Horizon Tintcoat
  • Lebih sporty daripada Lexus Matador Red Mica
  • Lebih cerah daripada Porsche Guards Red

Suka dengan kekayaan warna BMW Individual Aventurin Red atau Mazda Soul Red Crystal? Velvet Red menghadirkan karakter warna yang sama ke kendaraan yang sudah ada di garasi Anda. 

Features

Film Construction

  • Film Type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film Thickness: 0.15 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.11 mm
  • Total Thickness (with liner): 0.29 mm
  • Liner Thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll Width: 1.52 m (5 ft)
  • Roll Length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Saran berharga

Lihat semua
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Membungkus mobil berkarat: Apakah mungkin?

    Pembungkus mobil telah meledak dalam popularitas, menawarkan cara yang dinamis untuk mempersonalisasikan kendaraan. Tapi apa yang terjadi ketika kanvas tidak murni? Dapatkah Anda berhasil membungkus mobil dengan lapisan karat atau...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Cara membungkus mobil di musim dingin

    Membungkus mobil dalam vinil selama musim dingin bisa menjadi tantangan karena suhu dingin, tetapi dengan persiapan dan alat yang tepat, Anda masih dapat mencapai hasil akhir profesional. Bekerja di ruang...

    Vasile Sayfutdin |