Nothing is more special than bringing your unique ideas to a full print vinyl film, and designing a personalized vehicle. It is also an effective way of branding, creating a strong visual impact, and make people remember you.
However, these can only come true if you handle the wrap correctly, which includes how you approach the pre and post-installation. If you are planning on getting a full print vinyl film wrapped, here are some helpful tips for you:
Unlike other vinyl films, you should print your design before applying a full print wrap. And you need to make sure you have the right profile for the printer, or you might end up with a tackier or oversaturated material. You can check with the manufacturer to prevent this problem.
Even during printing, there are more things to consider, such as what ink you should use for the material. Generally, there are solvent, eco-solvent, and latex. They all have different properties. You should always choose according to your need to achieve the best result.
Outgas for smooth installation
For the vinyl film with solvent or eco-solvent ink, it is vital to outgas before laminating the wrap. (You can skip it if it is latex). Without outgassing, the solvent will get through the adhesive layer, which makes the material aggressive. And this will make your installation become unnecessarily tricky.
Depending on the printing media, the outgassing time can vary. It takes 48 hours for some and 24 hours for others. The safest way is to check with the manufacturer beforehand.
Laminate to preserve the finish
There is no need to worry that the graphics will fade as it is exposed to the sun daily because most ink in the market is UV-protected. Still, it is good to laminate your full print wrap, keep it from scratches, and preserve it better.
For lamination, you can choose from a solid and a liquid one. Although liquid lamination is cheaper, as it is mostly used by large printing houses, it can make the film difficult to install because it is thick. A solid lamination is, however, more flexible because it is thinner.
Wrap more cautiously
The most significant difference between a full print wrap and a standard vinyl film is that there are graphics on the material, which requires more caution when applying. When wrapping a color-change car wrap, a slight overstretch might only affect the performance and durability of the material, yet it will not show much on the surface. However, it will lead to distortion in the case of a full print wrap.
Once a full print film is distorted, the graphics will be out of shape, and the color at the particular spot will be whitened. This often happens in recessed areas, especially corners.
Handle corners first
To avoid this frustration, it is recommended to deal with corners first. Get yourself enough vinyl material to work around and conform. Then, you can deal with the flat surface with much less pressure.
Other than that, approach the wrap as you would to any other vinyl wrap film, but more attentively. And you should achieve a perfect result easily. Keep learning about wraps at teckwrap.com