SKU: SMT15-5M

Lapisan Vinyl Satin Metallic Flame Red (SMT15)

(12)
Rp 3.820.000,00
Pengiriman dihitung saat checkout.

Keterangan

Sebagian besar kain merah tampak seperti merah muda di bawah cahaya mendung atau oranye di bawah sinar matahari langsung. Warna Flame Red tidak berubah. Warna ini tetap merah sejati yang hangat dengan kilau metalik satin yang tetap konsisten dari fajar hingga senja.

Atribut Utama

  • Warna yang tetap konsisten: merah pekat dengan nada dasar hangat, mempertahankan rona aslinya di segala kondisi pencahayaan, tidak pernah berubah menjadi merah muda atau oranye
  • Kedalaman metalik satin: serpihan aluminium halus memantulkan cahaya dengan lembut, memberikan kilau berkilau rendah pada hasil akhir dengan butiran
    logam yang terlihat
  • Bahan kimia yang ramah lingkungan: perekat akrilik berbasis pelarut Henkel, transparan dan tahan cuaca, dapat dilepas tanpa
    meninggalkan residu
  • Penerapan yang sempurna: lapisan pelepas PET premium menjaga film tetap rata tanpa kerutan untuk hasil akhir
    satin yang halus
  • Dapat menyesuaikan dengan panas: meluncur dengan mulus di tepi, cermin, dan panel
    cekung sedang
  • Aman untuk cat: perekat yang dapat dilepas tidak merusak lapisan cat pabrik

Flame Red menghadirkan tiga nuansa: merah anggur tua dalam cahaya redup, merah tua hangat di siang hari, dan kilau metalik lembut yang bersinar tanpa menyilaukan. Hasil akhir satin menghilangkan tampilan plastik yang biasanya Anda temukan pada warna merah mengkilap. Letakkan di samping warna merah aftermarket pada umumnya dan perbedaannya langsung terlihat. Warna ini memiliki hasil akhir berkualitas pabrik.

Sesuai dengan OEM

  • Paling mirip dengan Audi Misano Red Pearl Effect
  • Memiliki kehangatan yang sama dengan Mazda Soul Red Crystal Metallic
  • Intensitas serupa dengan Ferrari Rosso Fuoco
  • Lebih kaya daripada Honda Rallye Red, dengan karakter metalik yang lebih dalam

Suka dengan warna merah asli pabrik pada Audi, Mazda, atau Ferrari? Kini, hadirkan energi warna yang sama pada Mustang, Supra, GR86, atau Model 3 Anda.

Features

Film Construction

  • Film Type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film Thickness: 0.16 mm
  • Backing Liner Thickness: 0.18 mm
  • Total Thickness (with liner): 0.34 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Saran berharga

Lihat semua
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Membungkus mobil berkarat: Apakah mungkin?

    Pembungkus mobil telah meledak dalam popularitas, menawarkan cara yang dinamis untuk mempersonalisasikan kendaraan. Tapi apa yang terjadi ketika kanvas tidak murni? Dapatkah Anda berhasil membungkus mobil dengan lapisan karat atau...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Cara membungkus mobil di musim dingin

    Membungkus mobil dalam vinil selama musim dingin bisa menjadi tantangan karena suhu dingin, tetapi dengan persiapan dan alat yang tepat, Anda masih dapat mencapai hasil akhir profesional. Bekerja di ruang...

    Vasile Sayfutdin |