SKU: CG52-HD-5M

Lapisan Vinyl Kulit Berkilau Tinggi Warna Beige (CG52-HD)

(4)
Rp 4.185.000,00
Pengiriman dihitung saat checkout.

Keterangan

Lapisan berwarna beige akan memudar menjadi warna seperti kapur, kekuningan, dan pudar saat terkena sinar matahari langsung. Leather Beige dari TeckWrap tetap mempertahankan keseimbangannya. Warna ini memiliki dasar warna pasir madu dengan nuansa karamel yang memberikan kesan seperti kulit berlapis, bukan logam yang dicat. 

Atribut Utama

  • Kehangatan yang terinspirasi dari kulit: warna beige yang menghadirkan nuansa kaya kulit pelana dengan dasar karamel lembut yang memberikan kedalaman tanpa terlihat gelap. 
  • Finishing mengkilap seperti krim: finishing berkilau tinggi menghasilkan pantulan yang pekat dan lembut seperti krim, bukan datar atau seperti kapur. 
  • Pemasangan bebas gelembung: film hibrida berlapis-lapis polimer dan saluran pelepasan udara membantu mengeluarkan udara yang terperangkap untuk proses pemasangan yang lebih mulus.  
  • Daya rekat tahan cuaca: perekat akrilik berbasis pelarut Henkel tetap transparan, tahan cuaca, dan dapat dilepas dengan bersih saat waktunya diganti.
  • Film yang mudah menyesuaikan bentuk: menyesuaikan diri pada lekukan, kaca spion, pegangan pintu, dan area cekung sedang dengan bantuan panas. 

Leather Beige terinspirasi dari bahan-bahan, bukan warna cat tradisional. Warna ini berada di antara warna unta, latte, dan cokelat muda hangat, menciptakan kesan kulit berlapis yang membentang di seluruh panel bodi. Di bawah cahaya langsung, kilapnya menghasilkan tampilan yang lembut dan cair. Di tempat teduh, nuansa madu dan karamel menjadi lebih menonjol, memberikan warna ini kekayaan yang jarang dicapai oleh lapisan beige datar. 

Kesesuaian dengan OEM

  • Paling mirip dengan Bentley Saddle Tan.
  • Memiliki kehangatan yang sama dengan Land Rover Champagne Sand Metallic.
  • Kekayaan warna yang sama dengan Porsche Cashmere Beige.
  • Lebih gelap daripada Lexus warm pearl beige. 

Tersedia pada model andalan Bentley, Porsche, dan Land Rover, Leather Beige dari TeckWrap menghadirkan sentuhan akhir yang terinspirasi dari warna sadel pada kendaraan yang tidak dilengkapi dengan fitur tersebut sejak awal.

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Saran berharga

Lihat semua
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Membungkus mobil berkarat: Apakah mungkin?

    Pembungkus mobil telah meledak dalam popularitas, menawarkan cara yang dinamis untuk mempersonalisasikan kendaraan. Tapi apa yang terjadi ketika kanvas tidak murni? Dapatkah Anda berhasil membungkus mobil dengan lapisan karat atau...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Cara membungkus mobil di musim dingin

    Membungkus mobil dalam vinil selama musim dingin bisa menjadi tantangan karena suhu dingin, tetapi dengan persiapan dan alat yang tepat, Anda masih dapat mencapai hasil akhir profesional. Bekerja di ruang...

    Vasile Sayfutdin |