SKU: ECH03-5M

Lapisan Vinyl Abu-abu Arang Metalik Matte (ECH03)

(4)
Harga reguler Rp 3.816.000,00
Pengiriman dihitung saat checkout.

Keterangan

Sebagian besar warna abu-abu matte terlihat seperti cat dasar atau tampak pudar di bawah pencahayaan apa pun. Charcoal Grey tidak demikian. Warna ini mempertahankan hasil akhir yang benar-benar datar dengan tekstur metalik yang cukup di bawahnya agar warnanya tidak pernah terlihat seperti kapur atau belum selesai.

Atribut Utama

  • Permukaan datar sejati: tanpa kilap dan tanpa kilau, terlihat matte dari segala sudut dan dalam segala pencahayaan
  • Tekstur metalik halus: serpihan aluminium mencegah warna abu-abu terlihat seperti cat dasar atau lapisan
    dasar yang pucat
  • Finishing yang dirancang khusus: film vinil polimer berkualitas tinggi yang dikalender dengan saluran pelepasan udara untuk hasil matte
    yang halus dan merata
  • Bahan kimia yang bersih: perekat akrilik berbasis pelarut dari Henkel, transparan dan tahan cuaca, dapat dilepas tanpa
    meninggalkan residu
  • Kemampuan menyesuaikan yang mendalam: dapat meregang di atas panel datar, lekukan sedang, dan lekukan dalam dengan inlay
  • Aman untuk cat: perekat yang dapat dilepas melindungi lapisan pabrik di bawahnya

Charcoal Grey tidak berusaha memantulkan cahaya seperti halnya lapisan satin atau metalik. Warna ini mempertahankan abu-abu yang benar-benar datar dan tidak memantulkan cahaya dalam segala kondisi, cukup gelap untuk terlihat sebagai warna yang serius dan profesional, bukan sekadar abu-abu primer biasa. Perhatikan dengan saksama dan Anda akan melihat tekstur metalik halus di bawah permukaannya, cukup untuk memberikan kedalaman pada warna tanpa menimbulkan kilau. Warna ini dirancang untuk pemilik yang menginginkan pembungkus yang terlihat disengaja dan rapi, bukan yang terkesan belum selesai.

Sesuai
dengan Warna Asli Pabrik

  • Paling mendekati versi matte dari Audi Nardo Grey
  • Memiliki kesan datar dan profesional yang sama seperti program
    Frozen Grey dari BMW
  • Lebih gelap dan lebih sejuk daripada Mercedes-Benz Selenite Grey
  • Lebih rapi daripada lapisan matte aftermarket bergaya primer pada umumnya

Tampilan matte datar pabrik dari program Frozen BMW atau edisi khusus Audi RS kini dapat diaplikasikan pada Civic Type R, F-150, atau Wrangler dengan mudah seperti halnya pada M4 Competition.

Spesifikasi:

  • Ketebalan Total Film: 0,28 mm
  • Ketebalan Lapisan Pelepas: 0,14 mm
  • Ketebalan Lapisan Aplikasi: 0,14 mm
  • Jenis Film: Film vinil polimer berkualitas tinggi yang dikalender dengan saluran pelepasan udara
  • Seri: Seri 190

Perekat & Lapisan Pelepas

  • Perekat: Akrilik berbasis pelarut Henkel, transparan, sangat tahan cuaca, viskositas 1000–3000 cps, ketebalan 12 μm saat kering
  • Liner Pelepas: Felix Schoeller / Kraft berlapis PE dua sisi, satu sisi dilapisi silikon tanpa pelarut, pelepas udara (ISO 9001, ISO 140001, OHSAS 18001)

Umur simpan: 3 tahun jika disimpan pada suhu +10°C hingga +20°C, kelembaban relatif 50%, dalam kemasan asli, jauh dari sinar matahari langsung, di tempat yang bersih dan kering

Kinerja & Pengujian:

  • Ketahanan / Garansi: Klik di sini untuk Lembar Data TeckWrap
  • Gaya Pelepasan (N/25mm): Standar 0,04–0,12 | Hasil 0,1 (23°C, 54% RH)
  • Daya Rekat Awal (g/25 mm): Standar 800–1500 | Hasil 1254 (23°C, 54% RH)
  • Kekuatan Pengelupasan 180° (N/25 mm): Standar ≥7,85 | Hasil 11,17 (23°C, 54% RH)
  • Kekuatan Adhesi: Standar ≥60 | Hasil 70 (Tidak bergeser)
  • Pasca Pemanasan: 100°C
  • Penuaan (65°C, 7 hari): Pelepasan pada suhu tinggi tanpa sisa perekat
  • Penuaan (-65°C, 10 hari): Pelepasan pada suhu rendah tanpa residu perekat

Panduan Pemasangan:

  • Suhu Pemasangan: +17°C hingga +18°C
  • Suhu Penggunaan: -45°C hingga +45°C
  • Alat yang Dibutuhkan: Squeegee lembut dengan bantalan
  • Kemampuan menyesuaikan bentuk: Permukaan datar dan lekukan sedang, ceruk dalam dengan inlay
  • Arah pemasangan: Ya
  • Lebar Tumpang Tindih: 4–5 mm

Kemasan:

  • Lebar gulungan: 152 cm
  • Panjang gulungan: 18 m

Catatan Penting

  • Gambar, warna, dan hasil akhir hanya perkiraan; selalu periksa contoh warna fisik
  • Gunakan gulungan dari LOT produksi yang sama untuk memastikan cakupan warna yang konsisten
  • Goresan yang terjadi selama pemasangan atau penggunaan sehari-hari tidak tercakup dalam garansi

Features

Film construction

  • Film type: high-grade polymeric calendered vinyl with air-release channels
  • Series: 190 Series
  • Film thickness: 121 μm
  • Release liner thickness: 180 μm
  • Material: conformable polymeric vinyl with a flat matte metallic finish
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.1 N/25mm (standard 0.04 to 0.12)
  • Initial tack: 1254 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 11.17 N/25mm (standard ≥ 7.85)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty

  • With proper care and a ceramic coating, this matte metallic finish offers up to 3 years of outdoor durability on vertical panels and around 2 year across a full wrap, depending on climate zone.
  • It is more delicate than gloss, and parking indoors or under cover extends its life. Heat-removable, with minimal adhesive residue when removed within the recommended period.

Application

  • Application temperature +17°C to +23°C
  • Tools: soft squeegee with buffer
  • Conformability: flat and moderate curves, deep recesses with inlays
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C, 48 hrs at room temperature recommended
  • Overlap: 4 to 5 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install

Care and maintenance

  • This is a flat matte metallic finish and it needs more care than a gloss or satin wrap. Outdoor durability is shorter than gloss and satin and depends heavily on climate, washing habits, and whether the vehicle is kept indoors. Parking under cover meaningfully extends the finish.
  • Wait 48 hours after installation before the first wash so the adhesive can fully set.
  • Hand wash only, using a pH-neutral shampoo (pH 3 to 11) and a clean microfiber mitt. Rinse grit away first, wash gently, then dry with a clean microfiber towel.
  • Avoid automatic car washes, brushes, abrasive pads, and high-pressure washers. All of these mark a matte surface.
  • Never use waxes, polishes, gloss enhancers, or any product containing solvents or petroleum distillates. These raise the sheen unevenly, dull the matte, and can permanently degrade the film.
  • A vinyl-safe, matte-compatible ceramic coating is recommended for added protection and easier cleaning. Standard gloss coatings will change a matte finish, so use a matte-rated product. Aftermarket coatings are applied at the owner's discretion and any coating-related damage is not covered.
  • Spot-clean fingerprints, fuel, bird droppings, and tree sap as soon as
    possible. The longer they sit, the more likely they stain.
  • Always test any cleaner or coating in a hidden area before treating the whole vehicle.

Disclaimer

  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.
  • TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.