Sku: TW-ARP-01

Teckwrap विंडो टिंट / पीपीएफ रबर स्क्वीज

नियमित रूप से मूल्य Rs. 500.00
शिपिंग चेकआउट में गणना की गई।

विवरण

फ्लिमी, जेनेरिक स्क्वीज के साथ संघर्ष करते हुए थक गए जो कि सतहों को खरोंच करते हैं या लकीरें छोड़ देते हैं? Teckwrap 5-इंच बहुउद्देश्यीय रबर निचोड़, पेशेवरों के लिए इंजीनियर, Diyers द्वारा प्यार करते हैं। आज एक उन्नयन के लिए खरीदें।

यह निचोड़ क्यों हावी है?
1। अपराजेय स्थायित्व: एक रॉक-सॉलिड मिश्र धातु हैंडल हमारे ब्रांडेड पॉलीयुरेथेन ब्लेड के साथ जोड़ा गया (सुरक्षा के लिए पर्याप्त नरम, प्रदर्शन करने के लिए पर्याप्त फर्म)। कोई ढहता नहीं, कोई अवशेष नहीं - बस साफ, चिकनी परिणाम।
2। ब्रांडिंग जो आपके लिए काम करती है: ब्लेड सिर्फ कठिन नहीं है; यह एक बिलबोर्ड है। कस्टम-ब्रांडेड डिज़ाइन के साथ, यह आपके पेशेवर स्तर को दिखाते हुए, हर स्वाइप को मुफ्त विज्ञापन में बदल देता है। 
3. एक उपकरण, शून्य समझौता: खिड़की के टिंट पर बुलबुले को निचोड़ने के लिए बिल्कुल सही, स्टबॉर्न पेंट प्रोटेक्शन फिल्म (पीपीएफ) को चौरसाई करना, या अन्य कार रैपिंग कार्यों से निपटना। एक बीट को याद किए बिना नौकरियों के बीच स्वैप।

समय बर्बाद करना बंद करो। Teckwrap की विंडो टिंट / PPF स्क्वीजी सहेजे गए सिरदर्द और प्रभावित ग्राहकों में खुद के लिए भुगतान करती है। अब ऑर्डर दें। आपका टूलकिट और आपकी प्रतिष्ठा इसके लायक है।

चश्मा उस बात:
सामग्री: मिश्र धातु हैंडल+पॉलीयुरेथेन स्क्वीज ब्लेड (मध्यम कठोरता)
असाधारण पहनने के प्रतिरोध के साथ प्रीमियम पॉलीयुरेथेन रबर ब्लेड और कोई अवशेष नहीं।
ब्रांड-अनन्य ब्लेड रंग: बढ़ी हुई प्रचारक मूल्य के लिए TeckWrap लोगो के साथ ब्रांडेड।
बहुउद्देश्यीय उपयोग: विंडो टिनिंग, पेंट प्रोटेक्शन फिल्म (पीपीएफ) इंस्टॉलेशन और मल्टी-पर्पस एप्लिकेशन के लिए आदर्श।
आयाम: लगभग। 13 x 18.5 सेमी/5.1 x 7.3 इंच

Features

Build construction

  • Tool type: Precision air-release pen for vinyl wrap and PPF
  • Grip: Eva Cloud textured comfort grip
  • Cartridge: Reinforced custom cartridge, heavy-duty design
  • Replaceable cartridge system
  • Compatible with vinyl wrap, PPF, and window tint installations

Performance

  • Precise needle tip releases trapped air without leaving visible marks on film
  • Buttery-soft grip reduces hand fatigue and improves control
  • Reinforced cartridge built to outlast standard snap-in alternatives
  • Reliable performance across thousands of installs
  • Ergonomic balance for steady, controlled handling

Storage

Store in a clean, dry place. Replace cartridge when the tip dulls or bends. Wipe down the grip and barrel after use to remove adhesive residue. Keep out of reach of children.

Application

  • Hold the pen at a low angle to the film, light touch is all you need
  • Gently pierce trapped air bubbles, then squeegee the area smooth
  • Use for hard-to-reach bubbles, edge sealing, and recessed detail work
  • Replace cartridge when the tip dulls, bends, or shows wear that could mar the film
  • Wipe the tip clean periodically to prevent adhesive buildup
  • Compatible with vinyl wrap, PPF, and tint film installations
  • Avoid using on overly stretched or thin film areas where punctures may spread
  • Best paired with a heat gun and squeegee for full installation control

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap tools are warranted to be free of defects in material at time of delivery. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, cartridge wear from extended use, damage from improper handling, dropped impact damage, or consequential damages.

The pen tip is sharp. Use with caution. TeckWrap is not responsible for injuries or film damage resulting from improper handling, excessive pressure, or use on thin or overstretched film areas. Always follow proper installation protocols.