नोवा ब्लू (CHM26-HD) विनाइल रैप

Film construction

• Film type: Polymeric PVC with silver coating and air-release channels
• Film thickness: 0.11 mm (110 µm)
• Total thickness with liner: 0.29 mm
• Liner: White silicone-coated paper, double-sided polyethylene coating
• Adhesive: Henkel solvent-based moderate adhesive
• Finish: Mirror chrome, amethyst-to-nebula shift, directional
• Roll width: 152 cm (5 ft)
• Full roll length: 18 m
• Roll weight: 13 kg

Performance

• Dimensional stability: less than 0.20% shrinkage
• Plastification: 23%–31%
• Storage shelf life: 3 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight
• Indoor service life: up to 4 years (correctly applied)
• Outdoor service life: up to 2 years (correctly applied)

Warranty

Standard TeckWrap limited warranty for chrome film. Scratches, micro-marks, and metalized-layer distortion from overstretching, overheating, or crumpling are characteristic of chrome material and not covered. Use same production LOT for color consistency across panels.

• Apply at +17°C to +23°C
• Service range: -35°C to +35°C
• Recommended tools: squeegee with soft buffer, steam vacuum or IR heater, knife, masking tape, magnets, gloves, IR thermometer
• Conformability: smooth and moderately curved surfaces only
• Directional film, check orientation before cutting
• Limited stretchability, avoid overstretching, crumpling, or aggressive repositioning
• Overheating permanently distorts the metalized layer
• Overlap: 3–4 mm
• Designed for partial wraps, accents, decals, and detailing
• Not recommended for full vehicle wraps
• Remove protective cap before install
• Professional installation strongly recommended

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, or any of the following characteristic to chrome and metalized films: surface scratches and micro-marks from installation or daily use, distortion of the metalized layer from overstretching, overheating, or crumpling, or durability beyond typical chrome film lifespan.

Chrome and metalized films are designed for partial wrapping applications. Full-vehicle wraps are not recommended. Professional installation by experienced installers familiar with chrome and metalized materials is strongly recommended. Color and reflectivity may vary depending on lighting conditions, viewing angles, and surroundings. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency across panels.