SKU: GAL35-HD-5M

Ultra Gloss Amber Gold Vinyl Wrap (GAL35-HD)

(2)
$229.00
Shipping calculated at checkout.

🇺🇸 USA Shipping & Duties

✅ Full rolls (59ft): FREE shipping + duties covered
We pay the freight and customs duties - your price at checkout is the final price. No surprise fees at delivery.

📦 Cut lengths (5ft–33ft): Shipping calculated at checkout (includes air freight + duties)

💡 Pro tip: Most installers go with the full roll - better value once shipping is factored in.

Description

Many metallic golds lose their depth and look too yellow, too bright, or too flashy. TeckWrap's Ultra Gloss Amber Gold delivers the quiet richness of factory champagne-bronze with a deep gloss finish that keeps its character from every angle. 

Key Attributes

  • Factory-metallic finish: champagne bronze with a liquid metal look that lives between bronze, satin beige-gold, and warm metallic sand.
  • Fine flake, smooth reflection: ultra gloss metallic flake keeps reflections smooth rather than sparkly. 
  • Wrinkle-free installation: built-in air-release channels push trapped air out during installation for a cleaner finish with fewer corrections.  
  • Strong, repositionable grip: Henkel solvent acrylic adhesive holds securely to panels before final pressure and peels off without residue.  
  • Conforms around complex curves: heat-responsive film stretches smoothly around mirrors, fenders, bumpers, and other curved surfaces.

Color Story

TeckWrap Amber Gold does not push for attention. It presents a champagne-bronze with a fine flake that smooths the light instead of scattering it. It shifts its character to a muted champagne under cloud, a satin bronze indoors, a rich amber in direct sun, and a warm honey gold at sunset. That adaptability is what gives it the look of an expensive factory metallic. 

OEM Match

  • Closest to Mercedes Kalahari Gold.
  • More saturated than Lamborghini Oro Elios.
  • Deeper than Land Rover Sunset Gold.
  • Sportier than the Porsche Gold Bronze Metallic.

Think of the champagne metallics found on Mercedes, Porsche, and Lamborghini models. TeckWrap Amber Gold puts that same color on any vehicle in your driveway. 

Features

Film Construction

  • Film Type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film Thickness: 0.16 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.32 mm
  • Liner Thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll Width: 1.52 m (5 ft)
  • Roll Length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |