SKU: SMT12-5M

Paradise Green (SMT12) Vinyl Wrap

(5)
$209.00 $519.00
Shipping calculated at checkout.

🇺🇸 USA Shipping & Duties

✅ Full rolls (59ft): FREE shipping + duties covered
We pay the freight and customs duties - your price at checkout is the final price. No surprise fees at delivery.

📦 Cut lengths (5ft–33ft): Shipping calculated at checkout (includes air freight + duties)

💡 Pro tip: Most installers go with the full roll - better value once shipping is factored in.

Description

Specifications

Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface).

  • The thickness of the film: 0.12mm
  • The thickness of film with release liner: 0.28mm

  • Type of film: Pressure-sensitive high-grade polymeric vinyl film with air-release channels 
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
  • Release liner: Felix Schoeller Release Liner / 20-104-20-1, 9 printed, double-sided PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
  • Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place
  • Durability/Warranty: Datasheet (Click the link) This color is less durable to UV exposure (10-12 months) and needs extra protection with a ceramic coating.
  • Post heating: 65 Celcius
  • Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02)
  • Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02)
  • Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02)
  • Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production)
  • Package:  Roll width 152 cm, length 18 m, weight 13 kg


Install tips:

Temperature: from +17°-18°С, usage from -45°С to +45°С

  • Tools: Standard squeegee with soft (wet) buffer
  • Conformability: smooth and medium curved surface
  • Directional: yes
  • Overlap width: 3-4mm

Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film. 

Features

Film construction

  • Film type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |