SKU: RB08-HD-5M

Gloss Metallic Coral Peach Vinyl Wrap (RB08-HD)

(13)
$229.00
Shipping calculated at checkout.

🇺🇸 USA Shipping & Duties

✅ Full rolls (59ft): FREE shipping + duties covered
We pay the freight and customs duties - your price at checkout is the final price. No surprise fees at delivery.

📦 Cut lengths (5ft–33ft): Shipping calculated at checkout (includes air freight + duties)

💡 Pro tip: Most installers go with the full roll - better value once shipping is factored in.

Description

Most bright oranges feel loud before you even start the engine. Most soft peach finishes disappear once you step back a few feet. Coral Peach balances both extremes. It carries the warmth of a coral-orange finish while using fine metallic pigment to create depth, movement, and a richer glow across every body line.

Key Attributes

  • Balanced color payoff: coral-orange metallic finish delivers warmth and visibility without the aggressive look of traditional performance oranges
  • Metallic depth: fine gold metallic pigment creates a copper-peach flash that stays visible as lighting conditions change
  • Clean chemistry: Henkel solvent acrylic adhesive, transparent and weatherproof, peels residue-free
  • Flawless application: premium PET release liner keeps the film tension-flat for a smooth gloss finish
  • Heat-conformable: glides over mirrors, bumpers, spoilers, and moderate recessed areas
  • Paint-safe: removable adhesive helps preserve your factory finish underneath

Color Story

Coral Peach shifts more than its name suggests. In softer light, it leans toward a muted coral tone with hints of salmon and rose gold. Under direct sunlight, the metallic layer wakes up, pulling warm peach, copper, and golden-orange highlights across the surface. The metallic grain adds depth instead of relying on saturation alone, giving the finish a cleaner OEM-style appearance. Stand it beside a typical aftermarket orange and the difference becomes obvious. Coral Peach feels warmer, softer, and more refined while still drawing attention from across a parking lot.

OEM Match

  • Closest to Chevrolet Amplify Orange Tintcoat (Corvette C8)
  • Softer than BMW Fire Orange (M3 / M4)
  • More metallic than McLaren Papaya Spark

Love the warmth of rare factory copper and performance orange finishes? Coral Peach brings that same color character to any Tesla, BMW, Audi, Mustang, Corvette, or project car that never offered it from the factory.

Features

Film Construction

  • Film Type: Premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Series: 190 Series
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Release Liner: 142 μm plastic
  • Roll Size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: Conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000–3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |