Color Shift Galaxy Green Vinyl Wrap (RD15-HD)

With a Rainbow drift collection of these stunning colors, TeckWrap offers color-shifting vinyl wraps, giving your vehicle a unique, stylish finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high-quality but reasonably priced.

Specifications

Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface).

• Film Thickness: 0.14 mm
• Backing Liner Thickness: 0.13 mm
• Release Liner Thickness: 0.03 mm
• Total Thickness (with liner): 0.30 mm
• Type of Film: Premium-grade polymeric multilayered hybrid vinyl film with air-release channels
• Width & Length: 1.52m × 18m (59.8" × 708.6", 4.98ft × 59ft, 1.66yd × 19.6yd)
• Series: 190 Series

Adhesive & Liner

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double-side PE coated Kraft (0.03 mm) (ISO 9001, ISO 14001, OHSAS 18001)

Storage

• Storing Period (Shelf Life): 2 years if stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place

Performance

• Durability / Warranty: Datasheet (Click the link)
• Application Temperature: +17°C to +18°C
• Usage Temperature: -45°C to +45°C
• Dimensional Stability: Shrinkage less than 3% (matte), 4% (glossy)
• Plastification: 27%–35%
• Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
• Peel Strength: 7.4 N/10mm (Average)
• Light Ageing in UV Exposure: Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005
• Test Result: 5, Pass
• Exposure Cycle: ASTM D4329-13 Cycle A
• Lamp Type: UVA-340
• Exposure Conditions: 8h UV at (60±2.5)°C BPT, 0.89 W/(m²•nm) @340nm, 4h condensation at (50±2.5)°C BPT, Exposure Duration: 49h
• Recommended Application Tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
• Application Method: Standard methods for calendared films. No overstretching. Post heating
• Post-heating Temperature: 100°C
• Aftercare: PH neutral; avoid wax or solvents
• Directional: Yes
• Tools: Soft squeegees

Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.