Black Matte (CM01M) Vinyl Wrap

$99.00


A moderate color isn’t necessarily tedious. TeckWrap Black is such a color, yet it presents a unique look subtly. It represents decency and reliability, perfect for the sophisticated.

With a collection of four solid colors, TeckWrap offers this series of super matte vinyl wraps, giving your vehicle a subtle-looking finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily.

Specifications

The thickness of the film: 0.12mm
The thickness of film with release liner: 0.28mm
Type of film: Medium-grade polymeric calendared film with air-release channels

Series: 180 series

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
Storing period:  3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place.
Durability/Warranty: Datasheet (Click the link)
Dimensional stability: shrinkage less than 0,20%
Plastification: between 25%-32%
Breaking Strength: 30.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05180º Peel Strength, to steel panel: 9 N/10mm (Average) Test Method: ASTM D3330/D3330-04

Light Ageing in UV Exposure:
Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5 / Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/(m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 48h

Install tips:

Temperature: from +18°С to 20°С, usage from -30°С to +30°С
Tools: Standard squeegee with a soft buffer
Conformability: smooth and medium curved surface
Directional: yes
Overlap width: 3-4mm

Package: Roll width 152 cm, length 18 m, weight 13 kg

The protective cap should be peeled off before installation.

Important note: The screen's images, colors, and finishes are approximate. For an actual representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film. 

Matte Vinyl wrap 1.52*3m (5*9.8ft, 1.6*3.3yd) / Black (CM01M) Black (CM01M) Vinyl Wrap
Matte Vinyl wrap Black (CM01M) Vinyl Wrap

Customer Reviews

Based on 3 reviews Write a review

Attention

Spliced rolls may be shipped from U.S. and overseas warehouses if full 59ft rolls are unavailable. An additional 2 yards of material is added to offset any potential loss in such cases. The product has an information sticker, and spliced rolls are marked with a sticky tab. All spliced rolls are authentic (of the same batch and color), defect-free, and adhere to strict quality standards.

How Much Wrap Do I Need?

Motorcycles 10-16 feet (3-5 meters)
Mini, small cars 42-45 feet (13-14 meters)
Convertible 49-52 feet (15-16 meters)
Coupe 55-59 feet (17-18 meters)
Sedan 55-59 feet (17-18 meters)
Hatchback 52-55 feet (16-17 meters)
Sports Car 52-55 feet (16-17 meters)
Station Wagon 59-65 feet (18-20 meters)
Sport-utility Vehicle (SUV) 55-63 feet (17-19 meters)
Minivan 65-80 feet (20-24 meters)
Pickup Truck 72-92 feet (22-28 meters)

Keep in mind that you may need extra material for repairs.
Therefore we recommend adding 6-9 feet (2-3 meters) to your measurements to avoid additional shipping expenses.

To achieve a perfect finish

  • We recommend using a tack reducer for flat panels.
  • Installation by at least two people/panel
  • Don't heat up to the line where the film is lifted to prevent adhesive lines.
  • Apply max 50 degrees of heat when stretching to prevent fading and marks.
  • Apply soap and water over the squeegee felt to avoid scratches.
  • Relax the film (heat and let it cool down) before applying it to a recess
  • Apply adhesive promoter on deep recesses
  • Post-heat a vinyl film to a recommended temperature





Delivery terms

The order processing time is 24 hours. We ship on working days (Monday-Friday) and provide tracking numbers within 48 hours from the order time.
The orders are shipped with FedEx, UPS and DHL. The average days to Delivery by Carrier: FedEx International 7-8 days, UPS International 6-8 days, UPS Domestic 2-3 days and DHL 7 days.

For US and Canada customers - Free domestic shipping is available from local warehouses on full 18-meter (59 ft, 19 yds) rolls. Please reach your sales manager for details.

 

Important

The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatches. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur.