SKU: CG33-HD-5M

High Gloss Avalon Teal Vinyl Wrap (CG33-HD)

(3)
$229.00
Shipping calculated at checkout.

🇺🇸 USA Shipping & Duties

✅ Full rolls (59ft): FREE shipping + duties covered
We pay the freight and customs duties - your price at checkout is the final price. No surprise fees at delivery.

📦 Cut lengths (5ft–33ft): Shipping calculated at checkout (includes air freight + duties)

💡 Pro tip: Most installers go with the full roll - better value once shipping is factored in.

Description

Avalon Teal is a Porsche-heritage blue-teal, a bright vibrant blue with a subtle tropical teal influence that sits directly in Porsche PTS bespoke territory between Riviera Blue, Fjord Blue, and Oslo Blue. In motion the surface develops a cool Scandinavian blue character with vibrant cyan energy and a slight teal freshness, shifting between cyan blue, electric blue, and tropical teal depending on the light. It reads closer to Porsche Riviera Blue crossed with a tropical teal than to a standard blue wrap. Where most bright blues go pool-blue, electric-aggressive, or turquoise-pop, this one stays expensive and unusually balanced, with the Porsche bespoke heritage and modern candy gloss of high-end European OEM blue paint.

This is the Porsche-coded blue-teal crossover of the lineup. Yacht Blue is the softer pastel coastal luxury, Bali Blue is the warmer tropical lifestyle, Vibrant Blue is the saturated motorsport electric, Baby Blue is the soft European pastel, and Tiffany is the green-shifted fashion-luxury; Avalon Teal is the Riviera-heritage anchor, executed with tropical teal freshness and modern HD gloss. Vibrant and exotic without being aggressive. It suits sporty luxury sedans, modern SUVs, and performance builds: a Porsche 911, Taycan, Macan, or Cayenne, a BMW M2, M4, i4, or iX, an Audi RS6, S5, R8, or e-tron GT, a Mercedes-AMG GT or EQS, a Tesla Model 3 Performance or Model S Plaid, a Lamborghini Huracán or Urus, a McLaren Artura, a Range Rover Sport or Velar, a Genesis G80 or GV60, a Lexus IS500 or LC500, or a Toyota GR Supra or GR86.

On OEM references the closest match is Porsche Riviera Blue, with Porsche Fjord Blue, Oslo Blue, and Ara Blue from the PTS palette, and BMW Estoril Blue and Audi Ara Blue Crystal in the same direction.

Key attributes:

  • Super Gloss HD vinyl wrap, Porsche-heritage blue-teal with vibrant cyan energy and tropical freshness
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET release liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |