SKU: GAL29-HD-5M

Rivestimento in vinile verde Hunter ultra lucido (GAL29-HD)

(14)
€202,95
Imposte incluse Spedizione calcolata al momento del checkout.

Descrizione

I verdi scuri tendono a sbiadire assumendo una tonalità militare spenta all’ombra, oppure diventano troppo brillanti al sole. Il TeckWrap Hunter Green mantiene l’equilibrio, conservando sempre la profondità della malachite e i riflessi smeraldini ben controllati. 

Caratteristiche principali

  • Profondità dai toni gioiello: il verde smeraldo scuro con sottili scaglie metalliche crea un effetto cromatico stratificato anziché una superficie verde piatta. 
  • Chiarezza metallica che reagisce alla luce: la pellicola ibrida polimerica multistrato e il pigmento metallico creano la profondità della vernice fresca e una forte lucentezza. 
  • Aderenza resistente alle intemperie: l’adesivo acrilico a base di solvente Henkel rimane trasparente e garantisce una tenuta salda anche sotto la pioggia e il calore.
  • Protegge la vernice: l’adesivo rimovibile si stacca senza lasciare residui né danneggiare la finitura di fabbrica. 
  • Facile da applicare: i canali di sfogo dell’aria consentono un’applicazione senza bolle. Si adatta a curve, spigoli e pannelli incassati senza sollevarsi.

TeckWrap Hunter Green si comporta in modo diverso dalla maggior parte dei verdi da competizione. In condizioni di cielo nuvoloso e in ombra profonda, assume una tonalità giada intensa. Esponendolo alla luce diretta del sole, il nucleo smeraldino si risveglia, proiettando riflessi verde brillante su tutta la carrozzeria. Al tramonto, lungo le curve e i pannelli laterali compaiono riflessi color verde acqua e zaffiro, conferendo alla finitura un effetto dai toni gioiello anziché un aspetto piatto. 

Corrispondenza OEM

  • Il colore più simile al Porsche Jet Green Metallic.
  • Stessa tonalità gioiello dell’Aremis Green di Aston Martin.
  • Stessa profondità del “British Racing Green” della MINI.
  • Più brillante del BMW British Racing Green IV.  
  • Leggermente più scuro del British Racing Green della Jaguar.

I verdi gioiello di serie compaiono raramente al di fuori di una manciata di modelli premium. TeckWrap Ultra Gloss Hunter Green conferisce lo stesso carattere smeraldino intenso ad auto sportive, berline di lusso, SUV e modelli ad alte prestazioni di qualsiasi marca.  

Features

Film Construction

  • Film Type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll Width: 1.52 m (5 ft)
  • Roll Length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Consigli preziosi

Visualizza tutto
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Avvolgimento di un'auto arrugginita: è possibile?

    Avvolgimento di auto è esploso in popolarità, offrendo un modo dinamico per personalizzare i veicoli. Ma cosa succede quando la tela non è incontaminata? Puoi avvolgere con successo un'auto con...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Come avvolgere un'auto in inverno

    Avvolgere un'auto in vinile durante l'inverno può essere impegnativo a causa delle temperature fredde, ma con la giusta preparazione e strumenti, puoi comunque ottenere una finitura professionale. Lavorare in uno...

    Vasile Sayfutdin |