SKU: CSC04-16M

Reflective Cast Chrome (CSC/CMC)

Rp 25.289.000,00
Pengiriman dihitung saat checkout.

Keterangan

Bahan krom cor yang sesuai dengan lapisan perak. Ini cocok untuk pembungkus mobil (atau permukaan halus atau menengah). Muncul dalam 8 warna reflektif untuk menciptakan penampilan yang khas dan meningkatkan estetika mobil. Kami sarankan memasangnya dengan vakum uap atau pemanas IRR.

Ketebalan film: 90 ± 5μm 

Ketebalan film dengan rilis liner: 245 ± 5μm

Jenis film: Cast vinyl film dengan saluran pelepasan udara

Periode penyimpanan: 3 tahun jika disimpan pada -20 ℃ hingga +65 ℃, dengan kelembaban relatif 50%, dalam paket asli, jauh dari sinar matahari langsung, di tempat yang bersih dan kering

Aplikasi: dari -20 ℃ hingga +65 ℃, penggunaan dari ≥ +10 ℃

Stabilitas dimensi: penyusutan kurang dari 0,10%

Kemasan: Gulungan lebar 152 cm, panjang 16 m

Catatan penting:

Gambar, warna, dan hasil akhir di layar adalah perkiraan. Selalu periksa warna swatch untuk representasi produk yang akurat. Gulungan dari nomor lot produksi yang sama harus digunakan untuk menyelesaikan pekerjaan bungkus, karena sedikit variasi warna batch-ke-batch dapat terjadi. Seseorang perlu menangani film-film yang disetujui dengan hati-hati, karena penampilan lapisan metalisasi dapat berubah pada saat kusut, overstretching, dan pemanasan yang terlalu kuat. Film ini dapat tergores selama aplikasi atau hari masuk dan keluar. Goresan film tidak tercakup oleh garansi.

Features

Film construction

  • Film type: Cast vinyl film with silver coating and air-release channels
  • Film thickness: 90 ± 5 µm
  • Total thickness with liner: 245 ± 5 µm
  • Finish: Chrome reflective, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 16 m

Performance

  • Dimensional stability: less than 0.10% shrinkage
  • Storage shelf life: 2 years at -20°C to +65°C, 50% RH, dry conditions, away from sunlight

Warranty

Standard TeckWrap limited warranty. Scratches and damage to the metalized layer from overstretching, crumpling, or excessive heat not covered. Use same production LOT for color consistency across panels.

Application
  • Apply at +17°C to +23°C
  • Service range: ≥+10°C
  • Tools: standard squeegee with soft buffer, steam vacuum or IR heater recommended
  • Conformability: smooth and medium-curved surfaces
  • Best for partial wraps and accents, not recommended for full vehicle coverage
  • Avoid overstretching and excessive heat that can damage the metalized layer
  • Cure: 24 hrs (48 hrs recommended)
  • Directional film, check orientation before cutting
  • Handle carefully, the chrome surface can scratch during install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Chrome films require careful handling. Crumpling, overstretching, and excessive heat can permanently damage the metalized layer. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Saran berharga

Lihat semua
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Membungkus mobil berkarat: Apakah mungkin?

    Pembungkus mobil telah meledak dalam popularitas, menawarkan cara yang dinamis untuk mempersonalisasikan kendaraan. Tapi apa yang terjadi ketika kanvas tidak murni? Dapatkah Anda berhasil membungkus mobil dengan lapisan karat atau...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Cara membungkus mobil di musim dingin

    Membungkus mobil dalam vinil selama musim dingin bisa menjadi tantangan karena suhu dingin, tetapi dengan persiapan dan alat yang tepat, Anda masih dapat mencapai hasil akhir profesional. Bekerja di ruang...

    Vasile Sayfutdin |