Film construction

• Film type: PET chrome film with metalized layer and air-release channels
• Film thickness: 0.11 mm (110 µm)
• Total thickness with liner: 0.27 mm
• Liner: Double-side PE-coated Kraft (ISO 9001, ISO 14001, OHSAS 18001)
• Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
• Finish: Mirror chrome, directional
• Roll width: 137 cm (54")
• Roll length options: 3 m / 5 m / 10 m / 15 m / 18 m
• Roll weight (full): 13 kg

Performance

• Stretchability: 2–3% (limited, partial wrap only)
• Dimensional stability: less than 0.20% shrinkage
• Plastification: 23%–31%
• Service range: -55°C to +65°C
• Storage: 3 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

Standard TeckWrap limited warranty for partial-wrap chrome film. Outdoor durability up to approximately 1 year on horizontal surfaces depending on UV, climate, and pollution exposure. Scratches, micro-marks, and metalized-layer distortion from overstretching, overheating, or crumpling are characteristic of chrome material and not covered. Adhesive residue of up to approximately 30% may occur on removal depending on installation and removal conditions.

• Apply at +17°C to +23°C
• Service range: -55°C to +65°C
• Dry installation only (no slip solution)
• Tools: squeegee with soft buffer, heat gun (controlled), steam vacuum or IR heater for assisted heating
• Use gentle, controlled pressure to minimize surface marks
• Conformability: smooth and lightly curved surfaces only
• Directional film, check orientation before cutting
• Limited stretchability (2–5%): do not overstretch, do not aggressively reposition
• Avoid strong heating, crumpling, or overstretching, these permanently distort the metalized layer
• Designed for partial wrapping, accents, decals, signs, and detailing
• Not recommended for full vehicle wraps
• Professional installation strongly recommended
• Optional lamination may improve durability and surface protection in some applications

Removal

• Cold removal recommended
• Hot removal increases adhesive residue
• Adhesive residue of up to approximately 30% possible depending on conditions

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, or any of the following characteristic to chrome and metalized films: surface scratches and micro-marks from installation or daily use, distortion of the metalized layer from overstretching, overheating, or crumpling, adhesive residue on removal (up to approximately 30%), or durability beyond the typical 1-year outdoor lifespan on horizontal surfaces.

Chrome and metalized films are designed for partial wrapping applications only. Full-vehicle wraps are not recommended. Professional installation by experienced installers familiar with chrome and metalized materials is strongly recommended. Color and reflectivity may vary depending on lighting conditions, viewing angles, and environmental surroundings. Chrome finishes may appear softer or slightly "milky" in natural light compared to high-contrast studio photography.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency across panels.