Sku: CSC04-16M

चिंतनशील कास्ट क्रोम (सीएससी/सीएमसी)

नियमित रूप से मूल्य Rs. 133,200.00
शिपिंग चेकआउट में गणना की गई।

विवरण

एक चांदी कोटिंग के साथ एक अनुरूप कास्ट क्रोम सामग्री। यह कार रैपिंग (या किसी भी चिकनी या मध्यम-घुमावदार सतह) के लिए उपयुक्त है। यह एक विशिष्ट उपस्थिति बनाने और कार के सौंदर्यशास्त्र में सुधार करने के लिए 8 चिंतनशील रंगों में आता है। हम इसे स्टीम वैक्यूम या आईआरआर हीटर के साथ स्थापित करने की सलाह देते हैं।

फिल्म की मोटाई: 90 ± 5μM 

रिलीज़ लाइनर के साथ फिल्म की मोटाई: 245 ± 5μM

फिल्म का प्रकार: एयर-रिलीज़ चैनलों के साथ विनाइल फिल्म कास्ट करें

भंडारण अवधि: 3 साल यदि -20 ℃ से +65 ℃ पर संग्रहीत किया जाता है, तो 50%की सापेक्ष आर्द्रता के साथ, मूल पैकेज में, प्रत्यक्ष सूर्य के प्रकाश से दूर, एक साफ और सूखी जगह में

आवेदन पत्र: -20 ℃ से +65 ℃ से, ≥ +10 ℃ से उपयोग

आयामी स्थिरता: 0,10% से कम सिकुड़न

पैकेट: रोल चौड़ाई 152 सेमी, लंबाई 16 मीटर

महत्वपूर्ण नोट:

स्क्रीन पर छवियां, रंग और फिनिश अनुमानित हैं। हमेशा उत्पाद के सटीक प्रतिनिधित्व के लिए स्वैच के रंग की जाँच करें। एक ही उत्पादन से लॉट नंबर से रोल का उपयोग रैप जॉब को पूरा करने के लिए किया जाना चाहिए, क्योंकि रंग का मामूली बैच-टू-बैच भिन्नता हो सकती है। धातु की फिल्मों को ध्यान से संभालने की जरूरत है, क्योंकि धातु की परत की उपस्थिति crumpling, ओवरस्ट्रैचिंग और बहुत मजबूत हीटिंग पर बदल सकती है। फिल्म को आवेदन के दौरान या इन -आउट के दिन के दौरान खरोंच किया जा सकता है। फिल्म की खरोंच वारंटी द्वारा कवर नहीं की जाती है।

Features

Film construction

  • Film type: Cast vinyl film with silver coating and air-release channels
  • Film thickness: 90 ± 5 µm
  • Total thickness with liner: 245 ± 5 µm
  • Finish: Chrome reflective, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 16 m

Performance

  • Dimensional stability: less than 0.10% shrinkage
  • Storage shelf life: 2 years at -20°C to +65°C, 50% RH, dry conditions, away from sunlight

Warranty

Standard TeckWrap limited warranty. Scratches and damage to the metalized layer from overstretching, crumpling, or excessive heat not covered. Use same production LOT for color consistency across panels.

Application

  • Apply at +17°C to +23°C
  • Service range: ≥+10°C
  • Tools: standard squeegee with soft buffer, steam vacuum or IR heater recommended
  • Conformability: smooth and medium-curved surfaces
  • Best for partial wraps and accents, not recommended for full vehicle coverage
  • Avoid overstretching and excessive heat that can damage the metalized layer
  • Cure: 24 hrs (48 hrs recommended)
  • Directional film, check orientation before cutting
  • Handle carefully, the chrome surface can scratch during install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Chrome films require careful handling. Crumpling, overstretching, and excessive heat can permanently damage the metalized layer. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.