Lámina cerámica para ventanas C70-2 mil Lámina para ventanas

Film construction

• Film type: Nano-ceramic automotive window tint film, light tint
• Thickness: 2 mil
• Application: Windshields, sunroofs, front side windows (subject to local laws)
• Directional: Yes
• Roll size: 1.52 m × 30 m
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Optical performance

• Visible Light Transmission (VLT): 70%
• Internal Visible Light Reflectance (VLR): 9%
• External Visible Light Reflectance (VLR): 9%
• Infrared Transmittance (IR): 12% (88% rejection)
• UV Rejection (UVC): ≥99%
• Total Solar Energy Rejected (TSER): 44%

Durability

• 2 mil thickness adds shatter protection
• Nano-ceramic construction resists scratches under harsh sunlight
• Dimensionally stable across temperature variations
• Long-term color stability and clarity
• Signal-friendly construction (no GPS, cell, or radio interference)

Warranty

Standard TeckWrap limited warranty against bubbling, peeling, cracking, and color fading. Improper installation, scratches from cleaning with abrasive tools, and physical impact damage are not covered.

• Professional installation strongly recommended
• Apply at +17°C to +23°C, dust-free environment essential
• Service temperature range: -45°C to +45°C
• Wet application with slip and tack solutions
• Recommended tools: squeegee, soft buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
• Maintain 3–4 mm overlap for seamless coverage
• Directional film, check orientation before cutting
• Peel protective cap before installation
• Allow 7–14 days for full cure before rolling windows down
• Avoid cleaning the film for 7 days after install
• After cure, clean with ammonia-free glass cleaner and soft microfiber only
• Verify local window tint laws before installation, VLT requirements vary by region and by window position

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, scratches from abrasive cleaning, or physical impact damage.

Local laws regarding automotive window tint vary significantly by region and may restrict VLT percentages on certain windows. Buyer is responsible for ensuring legal compliance. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency across windows. Scratches during installation or daily use are not covered.