SKU: SMT11-5M

Satin Metallic Surf Blue Vinyl Wrap (SMT11)

(4)
$ 3,688.00
Tax included Shipping calculated at checkout.

Description

Most light blues wash out pale and chalky. TeckWrap's Surf Blue doesn't. It stays fresh and clean, a bright sky-aqua with a soft satin metallic glow.

Key attributes:

  • Sky-aqua freshness: bright satin metallic sky blue with a clean, breezy aqua tone
  • Engineered finish: pressure-sensitive high-grade Renolit polymeric film with air-release channels for a smooth, even satin
  • Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and removable, peels residue-free
  • Flawless application: high-grade release liner keeps the film protected for an even, smooth satin lay-down
  • Heat-conformable: shapes over curves, mirrors, and recessed panels
  • Paint-safe: removable adhesive protects the factory paint underneath

Surf Blue is the light, summery end of TeckWrap's blue lane. Where Admiral Blue holds a deep royal and Rasant Blue runs midnight-electric, Surf Blue goes the other way, a bright sky-aqua that feels like sea breeze and open coast. The satin keeps it soft rather than glossy-sharp, so it reads relaxed and clean instead of loud. It pops on a compact EV or a daily that wants to look fresh and stand out without going neon. Next to a heavy dark blue it feels weightless and easy.

TeckWrap Satin Metallic Surf Blue compared to OEM blues:

  • Closest to a satinized Porsche Gulf Blue
  • Same fresh aqua as a Porsche Miami Blue, lighter
  • Same sky tone as a BMW Riviera Blue
  • Lighter than a Ford Grabber Blue
  • Softer than a Lamborghini Blu Cepheus

Love those fresh factory blues like Porsche Gulf or Miami Blue? Now put that sea-breeze aqua on your Model 3, Mini, or GR86.

Features

Film construction

  • Film type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • This is a bright, lower UV-stability color, around 10 to 12 months of outdoor durability depending on climate zone. A ceramic coating is recommended to protect the finish and extend its life. Heat-removable, with minimal adhesive residue when removed within the recommended period.

Application
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |