Paradise Green (SMT12) Vinyl Wrap

Most bright greens go one of two ways, neon and cheap, or so dark they stop reading as green at all. Paradise Green does neither. It holds a clean tropical green with a satin metallic grain that keeps the color lit without tipping into gloss.

Key Attributes

• Tropical green depth: vivid emerald base with fine metallic flake, bright enough to carry a whole car but held back from going neon
• Satin metallic sheen: low-glare finish lets the flake read as grain rather than sparkle, so the green stays clean instead of candy
• Engineered finish: pressure-sensitive high-grade Renolit polymeric film with air-release channels for a smooth, even satin
• Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and removable, peels residue-free
• Heat-conformable: shapes over curves, mirrors, and recessed panels
• Paint-safe: removable adhesive protects the factory paint underneath

Paradise Green is the loud end of TeckWrap's satin green lane. Where Pine Green runs deep forest and Green Mantle stays muted and sage, Paradise Green announces itself, a saturated tropical green with just enough blue in the base to keep it from sliding toward lime. The satin surface does the heavy lifting here. It kills the glare that would make a green this bright look plastic, so the metallic flake adds depth instead of glitter. In direct sun it lights up across the panels with a clarity close to a jewel tone. In shade it holds its color rather than sinking into a flat bottle green. Next to a standard bright green wrap, it reads finished rather than printed.

OEM Match

• Closest to a satinized Porsche Python Green
• Same tropical energy as a Lamborghini Verde Mantis, with less yellow in it
• More saturated than a BMW Java Green
• Cooler than a Ferrari Verde Kers

Love those loud factory greens on a 911 or a Huracán? Now run that same tropical green on your M4, Supra, Golf R, or Model 3.

Specifications

Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface).

• The thickness of the film: 0.12mm
  
• The thickness of film with release liner: 0.28mm
  
  
• Type of film: Pressure-sensitive high-grade polymeric vinyl film with air-release channels 
  
• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
  
• Release liner: Felix Schoeller Release Liner / 20-104-20-1, 9 printed, double-sided PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
  
• Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place
  
• Durability/Warranty: Datasheet (Click the link) This color is less durable to UV exposure (10-12 months) and needs extra protection with a ceramic coating.
  
• Post heating: 65 Celcius
  
• Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02)
• Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02)
• Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02)
• Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production)
• Package:  Roll width 152 cm, length 18 m, weight 13 kg

Install tips:

Temperature: from +17°-18°С, usage from -45°С to +45°С

• Tools: Standard squeegee with soft (wet) buffer
  
• Conformability: smooth and medium curved surface
  
• Directional: yes
  
• Overlap width: 3-4mm

Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.