SKU: CG31-HD-5M

High Gloss French Olive Green Vinyl Wrap (CG31-HD)

(3)
2,164.00 dh
Shipping calculated at checkout.

Description

Olive goes wrong in two directions. It drifts toward army-surplus drab, or it sinks into muddy brown. TeckWrap High Gloss French Olive holds the line between them, keeping a warm yellow-green core with the gloss doing the rest of the work.

Key Attributes

  • Warm olive core: dense yellow-green pigment over an earthy base, saturated rather than washed toward grey.
  • Super Gloss HD surface: premium polymeric hybrid film with a PET top layer delivers wet-paint clarity with no orange peel.
  • Bond that holds: Henkel solvent-based acrylic adhesive, transparent and ultra weather-resistant, releases without residue.
  • Paint stays protected: removable adhesive lifts clean and leaves the factory finish underneath untouched.
  • Non-directional handling: panels nest in any orientation, so there is no flake alignment to manage and less offcut waste.

TeckWrap French Olive sits in vintage European territory, somewhere between olive, moss, sage, and bronze-gold. Warm sun pulls a golden olive out of it with a bronze cast along the shoulders and hood. Overcast light flattens it toward a military sage. Deep shade drops it into a darker moss green, and sharp reflections skim across the panel almost metallic. The result reads as luxury olive rather than utility olive, and the gloss is what keeps it on that side of the line.

OEM Match

  • Closest to Porsche Olive Green (Olivgrün) from the PTS palette.
  • Same vintage-sport character as Audi District Green.
  • Same heritage lane as Audi Goodwood Green.
  • Warmer and more yellow-toned than Land Rover's British SUV greens.

Olive at this level normally arrives as a paid-to-order PTS commission or a limited launch color on a single model year. TeckWrap French Olive brings that same warm European olive to an Audi A6, RS6, Q7, or Q8, a Porsche 911, Cayenne, or Macan, a Defender or Range Rover Sport, a BMW X5 or X7, or a Mercedes GLS.

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.31 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |