How To Vinyl Wrap A Spoiler
Your spoiler takes the worst of the sun and road debris, and its curves, tight edges, and bolt holes make it the perfect practice piece for vinyl wrapping. This guide...
Installation Articles
How To Vinyl Wrap A Spoiler
-
Get your door a full coverage from all angles
When wrapping a door for a color change project, installers would mostly cut on the side of the door to get just enough extra material to wrap around the inside...
-
Wrapping around fixed handle with vinyl wrap film
When wrapping around a door handle with vinyl wrap film, it is easier to take it off, and wrap it separately. But for some cars, the door handle is wired...
-
Quick and safe - Fixing bubbles on vinyl wrap film with bare hand
For vinyl film wrapping, bubble is something that no wrapper can ever avoid. Whether you just start learning to wrap, or you are a master of wrapping, there will be...
-
Removal of mirror connected to door for easier wrapping process
Mirror is one of the most difficult parts to wrap with vinyl wrap film among all hardware of a vehicle. But for some cars, such a tricky section is directly...
-
Full coverage around headlights without removal
Mostly, there is a gap under each headlight of a vehicle, which can be tricky to get fully covered when wrapping. Some installers would bridge the vinyl wrap film over...
-
Wrap around fixed sidelight with vinyl wrap film
When wrapping a car with vinyl wrap film, taking off hardware can help you wrap much further and achieve higher quality. But in some cases, there are certain parts that...
-
Removal of different moldings for vinyl wrapping
Today, vehicles appear in a wide variety of styles and sizes in the market. And they continue to add new challenges to vinyl film wrapping because of their differences. Among...
-
Perfect template for wrapping raised area with vinyl film
When wrapping around a raised area like antenna or door handles, it usually takes time to form the vinyl wrap film around or spend quite a few attempts creating a...
-
Choose Knifeless Tape accordingly for vinyl film wrapping
Overlap made with Knifeless Tape plays an essential role in vinyl film wrapping, especially on a curvy section. For example, the top area of a back bumper, which connects to...
-
Wrapping hatchback trunk in two pieces of vinyl wrap film
Many hatchback trunks are not difficult to wrap with vinyl wrap film. But there are specific trunks that are quite tricky because they have a thick and solid rear part...
-
Fuel cap in perfect full coverage with vinyl wrap film
When wrapping up a fuel cap area with vinyl wrap film, most installers tend to make the blade of the knife parallel to the cap side (which can also be...
-
Wrap with non-air-release vinyl wrap film on roof
Wrapping with vinyl wrap film with no air-release technology is always tricky as the material tends to be aggressive. And it can be very challenging to wrap a roof of...
-
Perfect cut under side window molding for vinyl wrap film
When wrapping a vehicle with vinyl wrap film, it becomes a little tricky when it comes to the bottom moldings of side windows. Installers usually tend to bridge the material...
