How To Vinyl Wrap A Spoiler
Your spoiler takes the worst of the sun and road debris, and its curves, tight edges, and bolt holes make it the perfect practice piece for vinyl wrapping. This guide...
Installation Articles
How To Vinyl Wrap A Spoiler
-
Wrapping gap between two doors in one piece of vinyl
Recessed area is always a challenge for vinyl film wrapping. Wrapping the gap between the front door and back door is a significant example of that, as the angle is...
-
Wrap license plate area with chrome vinyl
Chrome vinyl wrap film can be tricky to deal with if you do not handle it properly. It is much thicker than other types of vinyl wrap film and stiffer....
-
Wrap Jeep grill in one piece of vinyl wrap film
A Jeep grill is kind of challenging to wrap, as it takes a significant amount of time to wrap well, and it is easy to overstretch the vinyl wrap film...
-
Pre-stretch vinyl wrap film for antenna application
Quite a few tips about wrapping an antenna with vinyl wrap film have been introduced here at TeckWrap, including creating a template for easier application, wrapping it in one piece...
-
Safe way to handle thin and aggressive vinyl wrap film
In some cases, installers need to wrap up a vehicle with a thin and aggressive vinyl wrap film. Mostly, aggressive wraps are thicker and not easy to be applied. Also,...
-
Wrapping double-sided recessed area with vinyl wrap film
It is kind of typical for a van to have double recessed areas on its side, where you see a group of squares, and they are each surrounded by a...
-
Make the best of post-heat for better vinyl wrapping result
Post-heating is always one of the most critical steps for vinyl film wrapping. But it is never just about heating the material and killing its memory. Ultimately, post-heating a vinyl...
-
Creating hinges for vinyl film wrapping
Making hinges is important during vinyl film wrapping, especially when you are working alone. Hinges can help installers secure the vinyl wrap film in the right position so that the...
-
Handle small covers on bumper with vinyl wrap film
For some vehicles, there are several plastic covers on the bumper. When you wrap it with vinyl wrap film, you can remove those covers first or leave them on. Here...
-
Wrap around back fender in one piece of vinyl wrap film
To wrap around the inside of back fenders of a hatchback is not something very tricky. But still, it is technical as the back fenders are curvy, and the vinyl...
-
Five things you must do for a successful wrap job
Develop good habits for vinyl film wrapping can help you do a better job. Sometimes, these details are the key to a successful finish. And here are five crucial things...
-
Remove back lights for easier vinyl wrapping
Usually, when wrapping a car with vinyl wrap film, it would make the whole process much easier if you remove the hardware. You will then be able to wrap much...
-
Wrapping curvy hood with carbon vinyl wrap film
It is a bit tricky to wrap a curvy hood with vinyl wrap film. And if you are wrapping with a carbon film, it becomes a real challenge. It is...
