How To Vinyl Wrap A Spoiler
Your spoiler takes the worst of the sun and road debris, and its curves, tight edges, and bolt holes make it the perfect practice piece for vinyl wrapping. This guide...
Installation Articles
How To Vinyl Wrap A Spoiler
-
Remove antenna for vinyl film wrapping
There are more challenges to wrap a roof with vinyl wrap film when there is an antenna, as you have to spend time and energy dealing with this raised object....
-
Creative way to wrap deep recessed area on bumper
For a bumper with deeply recessed areas where there is light and vent, the vinyl wrap film will very possibly lift over time if you wrap it in one piece,...
-
Wrap around steep wheel well with vinyl wrap film
When coming across a wheel well that is very deep and has a steep angle, it gets a little tricky to wrap with vinyl wrap film. However, with the proper...
-
Guarantee for quality: edge seal tape
When wrapping a challenging section like mirror in one piece of vinyl wrap film, tension builds on the film. And it is risky even if you have done everything right....
-
Adjust surface energy on vinyl wrap film accordingly
There are many factors to determine whether a vinyl wrap film install is successful. Most people tend to see only the subjective reasons, including things like improper wrapping skills. But...
-
Wrapping antenna in one piece of vinyl wrap film
There are several ways to wrap an antenna with vinyl wrap film. And here is one straightforward method: wrapping it in one piece with the help of relief cuts. ...
-
Why you should post-heat the vinyl wrap at the right temperature
Post-heat is one of the essential and crucial steps throughout a vinyl wrap install. But it is never enough to just post-heat the wrap to finish up the job. It...
-
Wrapping mirror in one piece of matte metallic vinyl film
Mirror is always one of the trickiest parts to wrap with vinyl wrap film. But in some cases, you can wrap it very quickly with one piece, for instance, when...
-
Create precise inlay for recessed area with vinyl wrap film
When working on a color change project, there are sections on a vehicle where you have to create pieces of inlay to ensure quality. For instance, a license plate section...
-
Applying cutting tape on hanging excess vinyl wrap film
When wrapping certain sections on a vehicle with vinyl wrap film, it gets challenging as you need to remove the excess material, especially when you are working on a color...
-
Safe way to remove molding with plastic clips before vinyl film wrapping
Hardware removal is an essential step in almost every vinyl film wrap job. But it often comes with the risk of damaging the parts, for example, breaking the plastic clips...
-
Deal with vehicle with damaged surface for vinyl film wrapping
Sometimes, a wrapper might come across a damaged vehicle, where there is rust or peeled coating. This can be very frustrating for vinyl film wrapping as it will affect the...
-
Wrap around raised section with quality and durability
Raised objects are something no installer can skip during vinyl wrap film application. For example, a door handle, molding, and antenna are all raised objects that you would come across....
