How To Vinyl Wrap A Spoiler
Your spoiler takes the worst of the sun and road debris, and its curves, tight edges, and bolt holes make it the perfect practice piece for vinyl wrapping. This guide...
Installation Articles
How To Vinyl Wrap A Spoiler
-
Wrap up hood with aggressive vinyl wrap film by yourself
Oftentimes, an installer has to wrap up a vehicle with vinyl wrap film all by themselves due to a lack of hands in the workspace. And it becomes challenging when...
-
Pre-production tips for full print vinyl wrap film
Full print vinyl wrap film is an excellent medium to express yourself or bring a message to the world. The install process is not much different from wrapping with a...
-
Stretching hypertexture vinyl wrap film for extra wide surface
What would you do when you have to wrap an extra-wide hood with a hypertexture vinyl wrap film, where the material is a few inches shorter than the hood on...
-
Why you should use aftercare products for vinyl wrap film
There is a certain lifespan for vinyl wrap film, whether it is a full print wrap or a color change wrap. If you did not maintain it properly, it will...
-
Perfect solution: Read recessed area before wrapping with vinyl wrap film
Recessed area is something that installers can never escape when wrapping with vinyl wrap film. And it should always be handled with proper techniques. Otherwise, the install will fail over...
-
Overlay on low surface energy vinyl wrap film
There are times when installers have to put an overlay piece (e.g., strip or cut vinyl) on top of a vinyl wrap film that has low surface energy, like a...
-
Achieve full coverage under tight molding
Getting a high-quality and long-term durability full coverage finish is the ultimate goal for most vinyl wrap installers. Indeed, it requires effort to achieve, but it does not mean you...
-
How to cut safely on the body of vehicle when wrapping
Knifeless tape has been an excellent help for vinyl wrap film wrapping, especially for sections where it is easy to cut on the paint when using a knife. However, there...
-
Wrapping bumper with several raised objects
There is a lot to consider when wrapping a bumper with vinyl wrap film. Recessed areas can be one kind of challenge. Besides them, there can be tricky raised objects...
-
What can happen if you skip post-heating
There is a lot to consider if you want to achieve a perfect finish with vinyl wrap film: the needed size of the panels, the temperature of your workspace, the...
-
Choose right angle to hold your blade when cutting
When wrapping with vinyl wrap film, it is crucial to hold the blade at the right angle to achieve the best result. Sometimes it should be held at a 45-degree...
-
How to use Triline to achieve full coverage hood
As many vehicles are made with composite hoods today, wrapping the top edge of a hood with vinyl wrap film can become challenging sometimes. They now usually have thicker edges...
-
Should you wrap all the way under vehicle?
When wrapping up a bumper or fender with vinyl wrap film, a wrapper often has to think about how far to wrap under the vehicle to achieve a higher-quality and...
