Golden Yellow (VCH408-S) Vinyl Wrap£91.00
With a collection of twelve elegant colors, TeckWrap offers you this series of satin chrome vinyl wraps. This luster film gives your vehicle a glossy finish, not too shiny. As a proud supplier, TeckWrap has plenty of film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices.
Conformable and flexible hybrid material. Designed for car wrapping (the smooth or medium curved surface).
The thickness of the film(um): 128
The thickness of the release liner(um): 179
Type of film: Polymeric vinyl film (silver coating) with new air-release channels
Series: 180 series
Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Durability/Warranty: Datasheet (Click the link)
Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H)
Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 822 (23℃,54%H)
180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 10,66 (23℃,54%H)
Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)
Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue
Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue
Package: Roll width 152 cm, length 18 or 23m
Temperature: +17-18°С, usage from -35°С to +35°С
Tools: Standard squeegee with soft (wet) buffer
Conformability: smooth and medium curved surface
Overlap width: 3-4mm
Post heating: 90 Celcius
Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. One needs to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, or too strong heating. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.
Сaution: Before purchasing and using, a customer shall determine the product's suitability for its intended use and should have experience wrapping metalized films. The current film has a limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend using a steam vacuum or IRR heater for installation. The dry application only.