SKU: SMT08-5M

Satin Metallic Admiral Blue Vinyl Wrap (SMT08)

(2)
£159.00
Tax included Shipping calculated at checkout.

Description

Most blues go either flat navy or cartoon-bright. TeckWrap's Admiral Blue doesn't. It holds a deep royal blue with a silky satin metallic glow.

Key attributes:

  • Royal blue depth: rich satin metallic royal blue with a silky, even sheen
  • Engineered finish: pressure-sensitive high-grade Renolit polymeric film with air-release channels for a smooth, even satin
  • Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and removable, peels residue-free
  • Flawless application: high-grade release liner keeps the film protected for an even, smooth satin lay-down
  • Heat-conformable: shapes over curves, mirrors, and recessed panels
  • Paint-safe: removable adhesive protects the factory paint underneath

Admiral Blue is the silk-finish royal blue, deep and saturated without the glassy hardness of a gloss. The satin tames the shine into a soft, even glow, so the blue reads rich and expensive rather than loud. It sits brighter and more electric than a navy but more grown-up than a primary blue, the kind of finish that looks deliberate on an SUV or a sport sedan. Where TeckWrap's gloss blues throw sharp reflections, Admiral Blue keeps it smooth and understated while holding all of the color.

TeckWrap Satin Metallic Admiral Blue compared to OEM blues:

  • Closest to a satinized BMW San Marino Blue
  • Same royal saturation as an Audi Sepang Blue
  • Same electric depth as a Porsche Gentian Blue
  • Deeper than a Lamborghini Blu Le Mans
  • Richer than a Mercedes Brilliant Blue

Love those factory blues on a BMW or an Audi? Now put that royal-blue glow on your GLC, M4, or RS3.

Features

Film construction

  • Film type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |