SKU: CG30-HD-5M

High Gloss Pale Celadon Vinyl Wrap (CG30-HD)

Regular price ¥1,583.00
Shipping calculated at checkout.

Description

Pale Celadon is a muted stone-sage neutral, a Scandinavian architectural color with a subtle warm-green undertone, drawing on celadon ceramic heritage and modern Nordic stone-sage palettes. In motion it develops a creamy desaturated character with a soft warm undertone, a refined pastel-luxury feel, and gentle green-cool shifts that read closer to Volvo Birch Light Metallic or Porsche Heron Grey than to a standard light grey wrap. Where most light neutrals go white, primer-flat, or cement-cold, this one stays warm, sage-tinted, and quietly sophisticated, with the muted ceramic-stone behavior of high-end Scandinavian OEM design.

This is the stone-sage architectural neutral of the lineup, completely distinct from the other greys. Slate Grey is the warmer Porsche-coded porcelain, True Nardo Grey is the technical performance neutral, Amazon Grey is the icy storm-grey, and Battleship Grey is the dark stealth-graphite; Pale Celadon is the soft, green-undertoned, Nordic-coded one. It suits Scandinavian-coded luxury SUVs and architectural-aesthetic builds: a Volvo XC60, XC90, or EX90, a Polestar 2 or 3, a Range Rover Velar, a Porsche Macan or Cayenne, an Audi Q3, Q5, or e-tron, a BMW iX, X3, or X5, a Mercedes GLC or EQE SUV, a Lucid Air or Gravity, a Genesis GV60 or GV80, a Tesla Model Y or X, a Lexus RX or NX, or a Toyota bZ4X or Crown.

On OEM references the strongest match is Volvo Birch Light Metallic, with a sage-shifted Porsche Chalk, Porsche Heron Grey as a good historical match, and the BMW Fashion Grey soft-luxury palette alongside.

Key attributes:

  • Super Gloss HD vinyl wrap, stone-sage luxury neutral with warm green undertone and ceramic-stone character
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET release liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.