Car wrap tips

When wrapping certain sections on a vehicle with vinyl wrap film, it gets challenging as you need to remove the excess material, especially when you are working on a color change project.   For example,...

When wrapping a vehicle with vinyl wrap film, it becomes a little tricky when it comes to the bottom moldings of side windows. Installers usually tend to bridge the material over the molding and the...

When you wrap up a section with a very tight molding that have metal inside, for instance, a window, you might want to leave the molding on during your install to avoid damaging it, or...

Knifeless tape has been an excellent help for vinyl wrap film wrapping, especially for sections where it is easy to cut on the paint when using a knife. However, there are times that knifeless tape...

When wrapping with vinyl wrap film, it is crucial to hold the blade at the right angle to achieve the best result. Sometimes it should be held at a 45-degree angle, while other times, it...

Climate control is important for vinyl wrap film wrapping, because the temperature can affect not only the install but also the final production.   But there might be times you have to work in a...

  When wrapping a section with raised objects that cannot be removed, it can be quite challenging for a wrapper to make clean cuts, such as wrapping around an antenna with vinyl wrap film.  ...

  There are times when you have to wrap with a vinyl wrap film that has white edges, which have not been trimmed off, for example, a full print film. It is quite tricky to...