Why Surface Energy Matters for Vinyl Film Wrapping
There are times when installers have to apply extra material, for example, stripes, on top of a vinyl wrap film for certain projects. This is when you HAVE TO understand...
How to install vinyl wrap
-
-
The Most-Needed Facts You Should Know about Vinyl Wrap Film Cutting
Cutting is always one of the crucial parts of a wrap job. A wrapper must cut off the excess vinyl wrap film clean and precisely. And this is no doubt...
-
How to Choose Cut Vinyl Wrap Film According to Your Need
Cut vinyl wrap film has been one of the highlights at a lot of sign shows, and it is widely used in lots of vehicle wrapping projects. Thus, understanding how...
-
How to Remove Adhesive on Top of Vinyl Wrap Film
Often times, when an installer tries to remove a vinyl wrap film from a vehicle, there might be adhesive leftover. And what they would do is to use adhesive promoter to...
-
Solution to Handle Vinyl Wrap Film When You Can’t Post-Heat
Post-heating has long been one of the major and must-do steps when installing vinyl wrap film. However, there are times when things come up, for example, power breakdown, running out...
-
This Combination of Techniques Helps You Achieve Better Result with Vinyl Wrap Film
Wrapping the front of a hood can always be a demonstration in terms of the importance of making relief cut, reading the material, and creating triangles all together during vinyl...
-
The Golden Rules to Wrap with Vinyl Wrap Film
As the automotive industry makes progress almost every other day, the appearance of a vehicle changes every now and then as well. And it is getting trickier and trickier to...
-
Handling Wrinkles with Vinyl Wrap Film on Roof
Roof wrapping is always one of the biggest parts when installing vinyl wrap film. And because the section is huge, the installer must follow the proper steps and work sequence...
-
Wrapping around Side Molding with One Piece Vinyl Wrap Film
Wrapping around side molding can be very difficult because of the tricky corners, especially when you have to do a color change project. Some installers like to make a small...
-
How to Handle Areas Around Front Light with Vinyl Wrap Film
Vehicles vary. And their front bumpers also have different styles. But what remains the same is that they all have some kinds of corners and recessed areas. And the trickiest...
-
Full Coverage of Chrome on Upper Portion for Doors
It is not unusual that vehicles have different kinds of moldings at the top of doors. But there are some very tricky ones with chrome on the upper portion of...
-
The Proper Sequence to Create Inlays with Vinyl Wrap Film
Inlays are essential for perfect color change projects. It not only enhances the precision of a wrap job, having the vehicle fully covered by the vinyl wrap film, but also...
-
Comparison: Two Methods to Wrap Fender with Vinyl Wrap Films
When wrapping a fender that is with a recessed area on the top, there are various ways to do it. Normally, the wrapper would either bridge the film and form...
