SKU: GAL29-HD-5M

Envolvimento em vinil verde caçador com acabamento ultra brilhante (GAL29-HD)

(14)
€202,95
Imposto incluído Os custos de envio são calculados aquando da finalização da compra.

Descrição

Os tons de verde escuro tendem a ficar opacos, assumindo um tom cinzento-militar à sombra, ou tornam-se demasiado brilhantes ao sol. O TeckWrap Hunter Green mantém o equilíbrio, preservando sempre a profundidade da malaquita e os reflexos esmeralda controlados. 

Características principais

  • Profundidade de tom de joia: o verde-esmeralda escuro com finas partículas metálicas cria uma cor em camadas, em vez de uma superfície verde plana. 
  • Clareza metálica que reage à luz: a película híbrida polimérica multicamadas e o pigmento metálico criam a profundidade da tinta fresca e uma clareza de brilho intenso. 
  • Adesão resistente às intempéries: o adesivo acrílico à base de solvente da Henkel mantém-se transparente e adere firmemente mesmo sob chuva e calor.
  • Protege a pintura: o adesivo removível descola-se sem deixar resíduos nem danificar o acabamento de fábrica. 
  • Manuseamento fácil para o instalador: os canais de libertação de ar permitem uma instalação sem bolhas. Adapta-se a curvas, arestas e painéis recuados sem se descolar.

O TeckWrap Hunter Green comporta-se de forma diferente da maioria dos verdes de competição. Em tempo nublado e à sombra profunda, assume um tom jade intenso. Quando exposto à luz solar direta, o núcleo esmeralda desperta, projetando reflexos verdes brilhantes por toda a carroçaria. Ao pôr-do-sol, surgem reflexos azul-petróleo e safira ao longo das curvas e dos painéis laterais, conferindo ao acabamento um efeito de tom de joia em vez de um aspeto mate. 

Cor idêntica à OEM

  • O mais próximo do Porsche Jet Green Metallic.
  • O mesmo tom de joia que o «Aremis Green» da Aston Martin.
  • A mesma profundidade que o «British Racing Green» da MINI.
  • Mais brilhante do que o BMW British Racing Green IV.  
  • Ligeiramente mais escuro do que o Jaguar British Racing Green.

Os tons de verde joia de fábrica raramente aparecem fora de um punhado de modelos premium. O TeckWrap Ultra Gloss Hunter Green confere esse mesmo carácter esmeralda profundo a carros desportivos, sedans de luxo, SUV e veículos de alta performance de qualquer marca.  

Features

Film Construction

  • Film Type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll Width: 1.52 m (5 ft)
  • Roll Length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Conselhos valiosos

Ver tudo
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Embrulhando um carro enferrujado: é possível?

    Embrulho de carro explodiu em popularidade, oferecendo uma maneira dinâmica de personalizar veículos. Mas o que acontece quando a tela não é intocada? Você pode enrolar com sucesso um carro...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Como embrulhar um carro no inverno

    Envolver um carro em vinil durante o inverno pode ser um desafio devido a temperaturas frias, mas com a preparação e as ferramentas certas, você ainda pode alcançar um acabamento...

    Vasile Sayfutdin |