Sku : SC70-3mil-5M

Vita Skin Care SC70-3mil 자동차 창 색조 필름

정가 ₩187,000
해운 결제시 계산.

설명

Teckwrap Vita70 Wind 안전 및 편안함을 우선시하는 운전자를 위해 설계된 VITA70은 70% 가시 광선 전송 (VLT)과 48% 총 태양 에너지 거부 (TSER)를 결합하여 제공합니다.

타당한 가시성 : 70%VLT는 안전을 손상시키지 않고 도로 ​​선명도를 보장합니다.
피부 및 인테리어 가디언 : 당신과 당신의 자동차의 내부를 보호하기 위해 99%UV 광선을 차단합니다.
열 거부 선구자 : 48%TSER는 객실이 냉담한 날에도 더 시원하게 유지합니다.
눈부심없는 초점 : Ultra-Low 0.09 반사율은 더 안전한 드라이브에 대한 산만 함을 최소화합니다.

 

창 필름

 

이름 Vita70 (SC70-3mil)
크기 1.52*30m
두께 3mil
재료 스킨 케어 나노 세라믹
응용 프로그램 전면 창 방패
VLT (%)
가시 광선 전송
70±2%
VLR (%)
내부 가시 광 반사
9%
VLR (%)
외부 가시 광선 반사
9%
ir (%)
적외선 투과율
15±2%
UVC (%)
자외선이 거부되었습니다
≥99%
TSER (%)
총 태양 에너지가 거부되었습니다
48±2%


VITA70의 3mil 스킨 케어 나노 세라믹 레이어는 신호를 손상시키지 않고 내구성을 제공합니다. Teckwrap Vita70 창 필름으로 앞 유리를 업그레이드하고 더 안전하고 시원하며 더 똑똑합니다. 
설정 완료 : 360 ° 태양 방어 및 응집력있는 미학에 대한 Vita30 (Light Tint) 및 Vita15 (Dark Tint)와 쌍을 이루십시오.

Features

Film construction

  • Film type: Skin Care nano-ceramic automotive windshield tint film
  • Thickness: 3 mil
  • Roll size: 1.52 m × 30 m
  • Color: Clear/light (SC70)
  • Application: Front windshield (subject to local laws)

Optical performance

  • Visible Light Transmission (VLT): 70 ± 2%
  • Internal Visible Light Reflectance (VLR): 9%
  • External Visible Light Reflectance (VLR): 9%
  • Infrared Transmittance (IR): 15 ± 2% (85% rejection)
  • UV Rejection (UVC): ≥99%
  • Total Solar Energy Rejected (TSER): 48 ± 2%

Durability

  • 3 mil thickness adds extra scratch resistance
  • Dimensionally stable across temperature variations
  • Long-term color stability and clarity
  • Nano-ceramic technology, signal-friendly performance

Warranty

Standard TeckWrap limited warranty against bubbling, peeling, cracking, and color fading. Improper installation, scratches from cleaning with abrasive tools, and physical impact damage are not covered.

Application

  • Professional installation strongly recommended for windshield application
  • Apply at +17°C to +23°C, dust-free environment essential
  • Wet application with slip and tack solutions
  • Tools: hard card, soft squeegee, heat gun, knife, microfiber cloth, slip solution
  • Allow 7–14 days for full cure before driving in heavy rain or washing
  • Avoid cleaning the film for 7 days after install
  • After cure, clean with ammonia-free glass cleaner and soft microfiber only
  • Verify local windshield tint laws before installation, regulations vary by region

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, scratches from abrasive cleaning, or physical impact damage.

Local laws regarding automotive windshield tint vary significantly by region. Some regions prohibit any windshield tint below the AS-1 line, while others permit films at 70% VLT or higher. Buyer is responsible for ensuring legal compliance. Screen images may vary, refer to physical samples. Use same production LOT for consistency across windows.