Sku : TW-TTS-01

teckwrap tuking 도구 세트

(1)
정가 ₩21,000
해운 결제시 계산.

설명

4 피스 접착 도구 세트
Teckwrap의 Premium 4-Piece Tucking Tool 세트로 설치를 높이십시오. 이 도구 세트는 차량 랩 설치에 대한 전문가 급 결과를 제공하도록 설계되었습니다. 고품질 재료로 제작 된이 도구는 탁월한 내구성과 성능을 제공합니다.
타의 추종을 불허하는 품질: 탁월한 내구성과 오래 지속되는 성능을 위해 프리미엄 재료로 제작되었습니다.
전문 브랜딩 : 가시성과 브랜드 인식을 높이기 위해 맞춤형 브랜드 로고로 비즈니스를 전시하십시오.
손가락 끝의 다양성 :

  • 흰색 집착 도구 : 경도가 더 부드럽고 헤드 라이트 이음새와 같은 더 큰 곡선과 틈을 탐색하는 데 이상적입니다.
  • 노란색 집착 도구 : 중간 정도의 경도 수준을 제공하므로 광범위한 응용 분야의 다재다능합니다.
  • 검은 색 집착 도구 : 경도가 더 단단하고 도어 솔기를 포함하여 직선 가장자리와 틈에 적합합니다. 또한 안전하고 전문적인 마감을 위해 가장자리를 누르면 탁월합니다.
  • Corner Squeegee : 더 큰 엔드는 더 부드럽고 빠르고 효율적인 에지 마감을 위해 설계되며 더 작은 엔드는 프레스를 방지하고 리프팅을 방지합니다.
    포장 프로젝트에 최선을 다하십시오

이 4 피스 탭핑 도구 세트는 모든 전문 자동차 랩 설치 프로그램에 필요합니다. 효율성을 높이고 완벽한 결과를 달성하며 프리미엄 도구로 경험을 높이십시오.
오늘 주문하고 차이를 느끼십시오! 

Features

Build construction

  • Kit type: 4-piece tucking tool set
  • Tool 1: White tucking tool, soft hardness, curved seams and headlight gaps
  • Tool 2: Yellow tucking tool, medium hardness, versatile general use
  • Tool 3: Black tucking tool, firm hardness, straight edges and door seams
  • Tool 4: Corner squeegee, dual-end (soft + firm) for edge finishing and pressing
  • Material: Premium-grade polymer construction
  • Branding: TeckWrap logo
  • Compatibility: vinyl wrap, PPF, and window tint installation

Performance

  • White soft tool: gentle pressure for curved seams without marking film
  • Yellow medium tool: balanced pressure for everyday tucking work
  • Black firm tool: aggressive pressure for tight straight gaps and edge sealing
  • Corner squeegee: combines finishing and lift-prevention in a single tool
  • Color-coded design speeds up tool identification mid-install

Storage

Store in a clean, dry place. Rinse tools after use to remove slip solution and adhesive residue. Avoid storing under heavy weight that could deform the edges. Replace individual tools when edges show nicks, hardening, or wear that could mar the film.

Application

  • White soft tool: use for curved seams, headlight gaps, mirror housings, and large recessed areas
  • Yellow medium tool: use for general tucking, mixed surfaces, and most install scenarios
  • Black firm tool: use for straight door seams, panel gaps, and edge pressing where firm pressure prevents lift
  • Corner squeegee soft end: use for quick edge finishing along long seams
  • Corner squeegee firm end: use for pressing edges and preventing lift after install
  • Always pair with film-appropriate slip solution to reduce friction
  • Wipe tools clean between passes to prevent dirt transfer onto film
  • Replace tools when edges show nicks, deformation, or hardening
  • Avoid using on sharp metal edges that could damage the tool surface

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap tools are warranted to be free of defects in material at time of delivery. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, tool edge wear from extended use, damage from improper handling, exposure to excessive heat that hardens or deforms the polymer, or consequential damages.

Always use with appropriate slip solutions on PPF and tint film to prevent scratching. TeckWrap is not responsible for damage to film or vehicle surfaces resulting from improper handling or worn tools.