Sku : SMT18R-5M

벨로 레드 (SMT18R) 비닐 랩

(4)
정가 ₩325,000
해운 결제시 계산.

설명

고전적인 색상을 새롭게 제시하는 것보다 더 독특한 것은 없습니다. 혁신적인 사람이라면 Teckwrap Velor Red가 당신을위한 것입니다. 심지어 평균조차도 미묘함과 연마 된 금속 광택의 완벽한 혼합으로 비교할 수 없습니다. 이제 개혁을 가져 오라고 지금 주문하십시오.

명세서

적합하고 신뢰할 수있는 렌 놀리 중합체 물질. 전체 자동차 포장 (또는 기타 부드러운 또는 곡면 표면)에 적합합니다.

필름의 두께는입니다 0.12mm 
릴리스 라이너가있는 필름의 두께 : 0.28mm

영화 유형: 공기 방출 채널이있는 압력에 민감한 고급 중합체 비닐 필름 
기음영형영형RS :  smt18r 벨로 레드

시리즈: 190 시리즈

점착제: 헨켈 용매 기반 아크릴 접착제, 투명한, 초고대 내성, 점도 1000 ~ 3000cps, 두께 12 μm 건조
릴리스 라이너 : Felix Schoeller 릴리스 라이너 / 20-104-20-1,9 인쇄, 더블 사이드 PE 코팅 크래프트. 한쪽은 독질없는 실리콘 코팅, 공기 방출 (ISO 9001, ISO 140001, OHSAS 18001)
저장 기간 : 3 년 최적의 품질을 위해 +10 ° с ~ +20 ° с에 저장되면, 상대 습도 50%, 원래 패키지, 직사광선에서 멀어지면 깨끗하고 건조한 장소
내구성/보증 : 데이터 시트 (링크를 클릭)
가열 후 : 65 Celcius

신장/휴식 MD : 206.8 / CD : 196.4 (테스트 방법 : ASTM D882-02)

인장 강도 : MD : 29.5/CD : 24.8 N/MM2- 속도 200mm/min (테스트 방법 : ASTM D882-02)

치수 안정성 : 2% - 오븐/10 '*70C (MD) (테스트 방법 : ASTM D1204-02)

표면 장력 : 34 Dynes/CM (테스트 방법 : ASTM D2578-04A, 생산 24 시간 후)

패키지:  롤 너비 152cm, 길이 18 또는 23m

팁 설치 :

온도 : +17 ° -18 ° с에서 -45 ° с에서 +45 ° с에서 사용합니다
도구 : 소프트 (습식) 버퍼가있는 표준 스퀴지
적합성 : 매끄럽고 중간 곡선 표면
방향 : 그렇습니다
오버랩 너비 : 3-4mm

중요한 참고 : 화면의 이미지, 색상 및 마감은 대략적입니다. 제품의 실제 표현을 위해 항상 색상 견본을 확인하십시오. 동일한 생산 로트 번호의 롤은 랩 작업을 완료하는 데 사용해야합니다. 필름은 적용 중 또는 하루 종일 및 사용 중에 긁힐 수 있습니다. 보증은 필름의 긁힘을 다루지 않습니다. 


Features

Film construction

  • Film type: Pressure-sensitive high-grade Renolit polymeric film with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-side PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic Velour Red, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m or 23 m

Performance

  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02, 200 mm/min)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage (ASTM D1204-02, 10 min at 70°C MD)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a, 24 hrs after production)
  • Storage shelf life: 3 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

Application

  • Apply at +17°C to +23°C
  • Service range: -45°C to +45°C
  • Standard squeegee with soft (wet) buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 65°C
  • Cure: 24 hrs (48 hrs recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Remove protective cap before install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.