Sku : RB40-HD-5M

티타늄 바이올렛 (RB40-HD) 비닐 랩

(1)
정가 ₩358,000
해운 결제시 계산.

설명

Teckwrap의 Titanium Violet Vinyl Wrap으로 대담하고 고급스러운 업그레이드를 제공하십시오. 이 프리미엄 메탈릭 바이올렛 랩은 자동차 페인트를 보호하면서 진술을하는 데 완벽한 고화질 마감 처리를 제공합니다. 전문가와 DIY 애호가 모두를 위해 설계된이 제품은 내구성과 부드럽고 거품없는 응용 프로그램을 보장합니다.

주요 기능
  • 멋진 마무리: 매끄럽고 대담한 모습을위한 고화질 금속 바이올렛.
  • 내구성: UV 손상, 긁힘 및 일일 마모에 대한 오래 지속되고 저항성.
  • 쉬운 응용 프로그램 : 공기 방출 기술은 거품이없고 부드러운 마감 처리를 보장합니다.
  • 다목적 사용 : 전체 자동차 랩, 맞춤형 악센트 또는 내부 디테일에 이상적입니다.
기술 데이터
  • 재료 : 금속 안료를 갖는 다층 고 중합 비닐 필름.
  • 필름의 두께 : 0.15mm (5.9 mils).
  • 릴리스 라이너 : 영화의 광택과 반사 특성을 향상시키기위한 독특한 플라스틱 라이너. 공기 방출 채널.
  • 신축성 : 열에 따라 최대 20%, 중간 정도의 복합 곡선에 적합합니다.
  • 접착제 유형 : 헨켈 용매 기반 아크릴 접착제, 투명, 초경량 저항성
  • 야외 내구성 : 3-5 년의 신뢰할 수있는 성능.
  • 응용 프로그램 방법 : 건식 응용 프로그램 만. 
  • 권장 온도 : 최소 적용 온도 +17 ° C ( +63 ° F). -35 ° C ~ +35 ° C의 사용
  • 저장 기간 (저장 수명): 2 년 +10 ° C ~ +20 ° C에 보관하면 원래 패키지에서 상대 습도가 50%인 직사광선에서 멀어지면 깨끗하고 건조한 장소
  • 크기 옵션 : 5 피트 x 9.8ft, 5ft x 16ft, 5ft x 33ft, 5ft x 49ft, 5ft x 59ft의 롤 크기로 제공됩니다.

응용 프로그램 지침

최적의 결과를 보장하기 위해 다음 단계가 권장됩니다.

  • 준비 : 적용하기 전에 표면에 깨끗하고 매끄럽고 왁스 나 그리스가 없는지 확인하십시오.
  • 보호 캡 제거: 적용하기 전에 보호 애완 동물 캡을 벗겨 내고 "터널링"을 방지하기 위해 보호 캡없이 필름을 보관하십시오.
  • 설치 : 사용 a 부드러운 마감 처리를 위해 소프트 버퍼 스퀴지를 사용하고 단단한 곡선과 가장자리를 위해 열을 적용하십시오. 물질을 과도하게 늘리지 말고 열이 나고, 적용 전후에 24-48 시간 동안 실내에서 차량을 유지하십시오.
  • 애프터 케어 : 마무리를 유지하기 위해 온화한 비누와 물로 씻으십시오. 연마 재료를 피하십시오.
  • 사후 온도 : 95 ° C. 응용 후 가열이 중요합니다.
  • 권장 애플리케이션 도구 : 스퀴지, 완충, 나이프, 마스킹 테이프, 히트 건, 자석, 장갑, IRR 온도계, IRR 히터
  • 비닐 필름은 방향입니다.

중요한 고려 사항

색상 일관성: 우리는 색상을 정확하게 표현하기 위해 노력하지만 화면 디스플레이의 변형이 인식에 영향을 줄 수 있습니다. 정확한 색상 일치하려면 우리의 문의하십시오 물리적 견본 책.
배치 매칭 : 톤의 약간의 차이를 피하려면 단일 프로젝트에 사용되는 롤이 동일한 생산 부지에서 나오는지 확인하십시오.
유지:이 영화는 약간의 흠집과 환경 마모에 저항하지만 정기적 인 청소 및 유지 보수는 시간이 지남에 따라 광택 마무리를 보존하는 데 도움이됩니다. 


Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.