Sku : CG47-HD-5M

빈티지 그레이 (CG47-HD) 비닐 랩

(3)
정가 ₩353,000
해운 결제시 계산.

설명

Teckwrap Vintage Grey는 모든 경우에 유연한 적합성과 적응성의 랩입니다. 항상 신뢰할 수있는 사람에게는 올바른 색상입니다.

Teckwrap은 차량에 견고하고 반짝이는 마무리를 제공하는 새로운 광택 HD 색상을 제공합니다. 오렌지 껍질이없는 부드러운. 재료는 신축성이 뛰어나며 모든 가장자리와 오목한 영역을 빠르게 포장합니다. 그리고 접착제는 제거 할 때 문제를 일으키지 않고 안전합니다. 이 필름에는 PET 보호 층이있어 설치 중 긁힘을 피할 수 있으며 (가열하기 전에 벗겨야 함) 플라스틱 라이너는 필름 표면을 더욱 광택 있고 반사적으로 만듭니다.

명세서

그는 필름의 두께 (um) : 110
릴리스 라이너 (UM)의 두께 : 142
영화 유형 : 공기 방출이있는 고급 중합체 캘린더 필름

점착제: 헨켈 용매 기반 아크릴 접착제, 초경량 내성, 점도 1000 ~ 3000cps, 두께 12 μm 건조
릴리스 라이너 : 플라스틱 라이너
저장 기간 : 2 년 +10 ° с ~ +20 ° с, 상대 습도 50%, 원래 패키지, 직사광선에서 멀어지면 깨끗하고 건조한 곳. 중요 : 최상위 보호 계층을 설치하기 전에 제거해야하며 필름은 "터널링"을 방지하기 위해 보호 층없이 저장해야합니다.
내구성/보증 : 데이터 시트 (링크를 클릭)

방출력 (N/25mm) : Standart : 0.10-0.30, 결과 : 0,18 (23 ℃, 54%h)

초기 압정 (g/25mm) : 테스트 방법 : GB31125-2014 : Standart 800-1500, 결과 : 1015 (23℃,54%H)

180 ° 껍질 강도 (N/25mm) : 테스트 방법 : GB/T2792-1998 : standart ≥4.9, 결과 : 8,1 (23℃,54%H)

접착력: 테스트 방법 : GB/T4851-1998, Standart ≥60, 결과 70 (이동 없음)

    노화 (65 5, 7 일) : STANDART- 접착제 잔류 물이없는 고온 방출, 결과 : 접착제 잔류 물 없음

    노화 (-65-, 10 일) : Standart -Low-접착제 잔류 물이없는 온도 방출, 결과 : 접착제 잔기 없음

    패키지:  롤 너비 152cm, 길이 18 또는 23m

    팁 설치 :

    응용 프로그램 : +16 ° с ~ +18 ° с, -30 ° с ~ +45 ° с에서 사용
    도구 : 소프트 버퍼가있는 표준 스퀴지
    적합성 : 매끄럽고 중간 곡선 표면
    방향 : 아니요
    오버랩 너비 : 3-4mm

    가열 후: 95 Celcius 

    설치 전에 보호 캡을 벗겨야합니다.

    중요한 참고 : 화면의 이미지, 색상 및 마감은 대략적입니다. 제품을 정확하게 표현하려면 항상 컬러 견본을 확인하십시오. 동일한 생산 로트 번호의 롤은 랩 작업을 완료하는 데 사용해야합니다. 필름은 적용 중 또는 하루 종일 및 사용 중에 긁힐 수 있습니다. 보증은 필름의 긁힘을 다루지 않습니다.

    Features

    Film construction

    • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
    • Film thickness: 110 µm
    • Liner thickness: 142 µm plastic (HD high-gloss)
    • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
    • Top layer: PET protective layer (peel before heating)
    • Roll width: 5ft (1,52m)
    • Full roll length: 59ft (18 m)

    Performance

    • Service temperature: -35°C to +35°C
    • Release force: 0.18 N/25mm (standard 0.10–0.30)
    • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
    • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
    • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
    • Aging tested: -65°C to +65°C, no residue
    • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

    Warranty

    • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

    Application

    • Application temperature: +17°C to +23°C
    • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
    • Conformability: smooth and medium-curved surfaces
    • Post-heat: 95–100°C (gloss finish)
    • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
    • Overlap: 3–4 mm
    • Non-directional film
    • Avoid overstretching during application
    • Remove the protective cap before installing
    • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

    Disclaimer

    All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


    TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
    Warranty does not cover normal wear, transportation, labor, or consequential damages.
    Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.