Sku : CG41-HD-5M

고광택 게코 그린 비닐 랩 (CG41-HD)

(4)
정가 ₩333,000
해운 결제시 계산.

설명

많은 네온 그린 색상은 전시장 조명을 벗어나면 생기를 잃고 올리브색으로 변해버리곤 합니다. TeckWrap의 하이 글로스 게코 그린은 강렬한 노란빛이 도는 녹색의 선명함을 유지하며, 하루 종일 채도를 잃지 않습니다.  

주요 특징

  • 시선을 사로잡도록 설계됨: 교통 흐름 속에 묻히지 않는, 사탕처럼 반짝이는 형광 노란빛이 도는 초록색. 
  • 광택이 핵심: 폴리머 다층 하이브리드 필름이 색상에 액체 같은 마감을 부여하여, 마치 내부에서 빛이 나는 듯한 밝은 특성을 유지합니다. 
  • 공기 배출: 필름을 부착할 때 갇힌 공기가 빠져나갈 수 있도록 도와주는 공기 배출 채널이 있어, 넓은 패널도 매끄럽게 다듬기 쉽습니다. 
  • 사계절 내내 확실한 접착력: 투명한 헨켈(Henkel) 용제형 아크릴 접착제는 내후성이 뛰어나며, 잔여물 없이 제거할 수 있습니다.
  • 모든 곡선을 완벽하게 따라갑니다: 열을 가하면 필름이 미러, 범퍼, 모서리, 그리고 적당히 오목한 패널 주위에 안정적으로 밀착됩니다. 

‘게코 그린(Gecko Green)’은 평범한 녹색이 아닙니다. 산뜻한 라임색, 형광 노란색, 레이싱 그린의 중간 어딘가에 위치하며, 광택 있는 표면 덕분에 색상이 마치 불이 켜진 듯 생동감 있게 보입니다. 밝은 햇빛 아래에서는 거의 방사능을 뿜는 듯한 라임색으로 변하고, 흐린 날에는 더 깊은 머슬카 그린을 드러내며, 야간 조명 아래에서는 사탕을 입힌 듯한 빛을 발합니다. 단순히 평평하게 칠해진 밝은 색상이 아니라, 사탕처럼 색상 뒤에 깊이가 느껴집니다. 

OEM 색상 일치

  • 닷지 서블라임 그린(챌린저/차저)에 가장 가깝습니다. 
  • 닷지 라임 라이트(데몬 / 챌린저 R/T)와 동일한 형광 느낌을 지닙니다.
  • 람보르기니 베르데 쇼크(우라칸)보다 더 따뜻한 색감입니다.
  • 아우디 RS 시리즈의 산성 그린보다 더 밝습니다.
  • 가와사키의 시그니처 그린과 동일한 강도를 지녔습니다.

닷지가 이 색상을 유명하게 만들었고, 람보르기니가 한 단계 더 발전시켰으며, 게코 그린은 여러분의 차고에 있는 차량에도 그와 같은 강렬한 에너지를 불어넣어 줍니다.  

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.