Liquido di installazione del film per protezione della vernice

Build construction

• Product type: PPF installation slip solution
• Format: Spray application
• Compatibility: All TeckWrap PPF products and most automotive paint protection films
• Surface safety: Non-corrosive, residue-free, factory paint-safe

Performance

• Reduces air bubbles and wrinkles during film application
• Allows controlled film repositioning during install
• Maintains adhesive strength and bond quality after cure
• Leaves no sticky residue or surface marks
• Works on smooth, curved, and recessed panels

Storage

Store in a cool, dry place above 0°C, out of direct sunlight, and away from children. If the solution freezes, thaw above 0°C before use. Keep the spray nozzle clean to prevent clogging. Replace the cap securely after each use.

• Prep the surface: clean the target area thoroughly before applying any solution
• Spray evenly: apply the slip solution uniformly to the cleaned panel
• Install PPF: follow standard paint protection film installation procedures
• Remove excess liquid: use a soft squeegee to push remaining solution out from under the film
• Do not apply in direct sunlight or on hot vehicle surfaces, this causes premature evaporation and poor results
• Best used at +17°C to +23°C with the panel at ambient temperature
• Wipe the squeegee periodically during install to prevent dirt transfer
• After install, allow the film to fully cure (24–48 hours) before exposure to water, washing, or detail products
• Avoid contact with eyes, do not ingest, and minimize direct skin contact

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap installation chemicals are warranted to be free of defects at time of delivery. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal product depletion, damage from improper handling, contamination, freezing damage, exposure to incompatible chemicals, or consequential damages.

Avoid contact with eyes, ingestion, and prolonged skin contact. Keep out of reach of children. Do not use on hot surfaces or in direct sunlight. TeckWrap is not responsible for installation results, film damage, or surface damage resulting from improper use, contaminated solution, or use outside the recommended application conditions.