SKU: GAL11-HD-5M

Pellicola vinilica Ultra Gloss Super Silver Mist (GAL11-HD)

(2)
€202,95
Imposte incluse Spedizione calcolata al momento del checkout.

Descrizione

Il colore argento spesso tende a sbilanciarsi eccessivamente in una direzione. Alcune tonalità virano verso un blu freddo, mentre altre tendono al grigio scuro o cercano di ricreare un effetto cromato. TeckWrap Super Silver Mist mantiene un equilibrio perfetto, offrendo una finitura platino liquido che sembra proprio la verniciatura originale. 

Caratteristiche principali

  • Volutamente neutro: né blu, né grigio, né cromato. La base in platino liquido evita la brillantezza "da giocattolo" tipica degli argenti generici.  
  • Sottile nebbiolina metallica: il pigmento metallico fine come la perla crea profondità senza una finitura ruvida o scintillante. 
  • Aspetto simile alla verniciatura di fabbrica: la pellicola ibrida polimerica multistrato mantiene riflessi nitidi e una limpida lucentezza metallica su tutta la superficie. 
  • Applicazione termoconformabile: avvolge curve, specchi e pannelli moderatamente incassati mantenendo l’uniformità metallica. 
  • Adesivo acrilico a solvente Henkel: trasparente, resistente agli agenti atmosferici e rimovibile senza lasciare residui. 

Teckwrap Super Silver Mist evita l’aspetto cromato brillante che caratterizza la maggior parte dei metallizzati aftermarket. Sotto la luce diretta del sole, proietta un bagliore simile a quello del metallo fuso lungo le linee e i contorni della carrozzeria. Al calar del sole, assume una calda tonalità champagne. All’ombra, vira verso un platino pulito. A differenza degli argenti più brillanti ispirati al cromo, questa finitura rimane liscia e in linea con lo stile automobilistico. Sembra una vernice OEM di alta gamma piuttosto che un colore speciale. 

Corrispondenza OEM

  • Il più simile al Mercedes Designo Silver Metallic. 
  • Più chiara del BMW Individual Rhodonite Silver. 
  • Più calda del Lamborghini Argento Nürburgring. 
  • Stessa saturazione del “Quicksilver” di Tesla.

I migliori argenti di serie non seguono mai le mode. TeckwWrap Super Silver Mist segue la stessa filosofia, conferendo una finitura platino equilibrata a una 911, una Model S, una RS6, una M5 o qualsiasi altra piattaforma che lo meriti. 

Features

Film Construction

  • Film Type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.29 mm
  • Liner Thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll Width: 1.52 m (5 ft)
  • Roll Length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Consigli preziosi

Visualizza tutto
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Avvolgimento di un'auto arrugginita: è possibile?

    Avvolgimento di auto è esploso in popolarità, offrendo un modo dinamico per personalizzare i veicoli. Ma cosa succede quando la tela non è incontaminata? Puoi avvolgere con successo un'auto con...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    Come avvolgere un'auto in inverno

    Avvolgere un'auto in vinile durante l'inverno può essere impegnativo a causa delle temperature fredde, ma con la giusta preparazione e strumenti, puoi comunque ottenere una finitura professionale. Lavorare in uno...

    Vasile Sayfutdin |