SKU: RB36-HD-5M

Rivestimento in vinile blu palladiano metallizzato lucido effetto camaleonte (RB36-HD)

(4)
Prezzo normale €202,95
Imposte incluse Spedizione calcolata al momento del checkout.

Descrizione

La maggior parte delle finiture blu-verdi tende troppo verso un’unica direzione: o diventano eccessivamente blu oppure assumono una sfumatura verde opaca al variare della luce. Il Palladian Blue rimane perfettamente nel mezzo. La sua finitura metallizzata lucida passa da un nitido verde acqua costiero sotto il sole splendente a un ricco blu-verde all’ombra, mantenendo la sua profondità senza apparire torbido.

Caratteristiche principali

  • Variazione cromatica equilibrata: le sottili scaglie metalliche passano naturalmente dal verde acqua al blu-verde, conferendo profondità alla finitura da ogni angolazione.
  • Lucentezza a specchio: la pellicola ibrida polimerica multistrato crea una lucentezza liscia dall’effetto bagnato con un’eccellente trasparenza e un effetto “buccia d’arancia” ridotto.
  • Composizione chimica pulita: l’adesivo acrilico a base di solvente Henkel rimane trasparente, resiste agli agenti atmosferici e si stacca senza lasciare residui quando è il momento di rinnovare il look.
  • Facile da applicare: il rivestimento protettivo in PET di alta qualità mantiene la pellicola perfettamente tesa, mentre il materiale termoformabile avvolge con facilità specchi, bordi e pannelli moderatamente incassati.
  • Protezione che non danneggia la vernice: l’adesivo rimovibile aiuta a preservare la finitura originale sotto la pellicola.

Il Palladian Blue si colloca a metà strada tra il blu oceano e il moderno verde acqua, conferendogli un carattere equilibrato che trasmette calma piuttosto che vivacità. Alla luce soffusa del giorno, la grana metallica crea una ricca superficie blu-verde con una notevole profondità. La luce solare diretta fa risaltare riflessi verde acqua più brillanti senza sovrastare il colore di base. Molte tonalità blu-verdi disponibili sul mercato aftermarket tendono al turchese o al salvia tenue. Il Palladian Blue mantiene in equilibrio sia il blu che il verde, creando l’aspetto pulito di una finitura metallizzata di fabbrica ben eseguita.

Corrispondenza
OEM

  • È il colore più simile al BMW Atlantis Metallic, con un carattere blu-verde freddo simile e una finitura metallizzata raffinata.
  • Leggermente più intenso del "Fjord Green Metallic" di Porsche.
  • Più freddo del Mini Sage Green Metallic, con una minore influenza del giallo.
  • Più pulito e più equilibrato rispetto a molte pellicole aftermarket color verde-azzurro che tendono fortemente verso il verde.

Ti piacciono quei rari blu-verdi di serie? Applica lo stesso colore raffinato alla tua M4, Corvette C8, Mustang, AMG GT o Model Y.

Features

Film Construction

  • Film Type: Premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Series: 190 Series
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.31 mm
  • Release Liner: 142 μm plastic
  • Roll Size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: Conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000–3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.