Rivestimento in vinile verde "Mantle" satinato metallizzato (SMT05)

Film Construction

• Film Type: Pressure-sensitive high-grade polymeric with air-release channels
• Film Thickness: 0.14 mm
• Backing Liner Thickness: 0.14 mm
• Total Thickness (with liner): 0.28 mm
• Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
• Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
• Finish: Satin metallic, directional
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service range: -30°C to +30°C
• Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
• Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
• Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
• Surface tension: 34 dynes/cm (ASTM D2578-04a)
• Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

• Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

• Apply at +17°C to +23°C
• Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 85°C
• Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
• Overlap: 3–4 mm
• Directional film, check orientation before cutting
• Avoid overstretching during application
• Remove the protective cap before installing
• Aftercare: pH-neutral products only, avoid waxes and harsh solvents
  

• All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
• TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
• Warranty does not cover normal wear, transportation, labor, or consequential damages.
• Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.